tjriddle61
New member
- Joined
- Aug 9, 2020
- Messages
- 19
- Tractor
- mitsubishi 2501fd
Recently acquired a B414 gas tractor ans slowly getting to know the ins and outs. Is there a secret to engaging the pto lever without the grinding?
B414 PTO
- Thread starter tjriddle61
- Start date
- Views: 587
-
- Tags
- pto
Roadworthy
Elite Member
When engaging the PTO I have the tractor at idle, depress the clutch, and engage the PTO. If depressing the clutch does not prevent grinding your clutch may be out of adjustment. There should be about an inch of free play at the pedal before it starts to disengage the drive.
dieselscout80
Veteran Member
On these IHs like the 414/424/444/384 the clutch has two stages the first stage stops the movement of the tractor. Then if you push the clutch pedal down farther then the power to the PTO stops.
Per the above post yes engage/shift the PTO at idle.
Per the above post yes engage/shift the PTO at idle.
