Lockport
Platinum Member
Just curious, what's your nearest Kioti dealer pricing out a block heater for?
Best choice for engine heater CK 30 (block, heater hose, magnetic?)
- Thread starter DOCatRU
- Start date
- Views: 27363
comancheflight
Gold Member
Mine was $68
Here is a link to my same questions - with pictures
http://www.tractorbynet.com/forums/...nx-cab-radiator-heater.html?referrerid=282553
Here is a link to my same questions - with pictures
http://www.tractorbynet.com/forums/...nx-cab-radiator-heater.html?referrerid=282553
comancheflight
Gold Member
I can pm my dealer to you and he can drop ship it to you. It was $68 this past spring.
buickanddeere
Super Member
Less cylinder wall. ring and piston wear too.
OP
DOCatRU
Bronze Member
- Joined
- Oct 24, 2013
- Messages
- 58
- Location
- Wallingford, VT
- Tractor
- Kioti CK 30 (2008, gear drive, 415 hours)
The closest dealer to me is Moores Corners in New York State. They quoted me $130 for the part. I blanched.....if it is $68 I would put one in two shakes of a lamb's tail.
DOC
RickB
Super Star Member
- Joined
- Sep 18, 2000
- Messages
- 15,143
- Location
- Up the road from Dollar General WNC
- Tractor
- Just a Scag
Looks like the same heater as the TISCO heater referenced above. I stock and sell that one.
Sucks that Kioti sells that one as a whole good not a part. No freight free dealer stock order.
jabelding
Gold Member
Got the parts in and now I have the correct heater for the bushing, the one in my original post was a 1" instead of the 3/4 needed. Here are the links to the correct amazon parts if anybody wants them.
Heater
Amazon.com: Zerostart 310-0002 Engine Block Heater: Automotive
37.47
Bushing
Amazon.com: TISCO - PART NO:GE11461B. HEATER BUSHING: Industrial & Scientific
19.95
total of 57.41 with prime.
Heater
Amazon.com: Zerostart 310-0002 Engine Block Heater: Automotive
37.47
Bushing
Amazon.com: TISCO - PART NO:GE11461B. HEATER BUSHING: Industrial & Scientific
19.95
total of 57.41 with prime.
OP
DOCatRU
Bronze Member
- Joined
- Oct 24, 2013
- Messages
- 58
- Location
- Wallingford, VT
- Tractor
- Kioti CK 30 (2008, gear drive, 415 hours)
jabelding:
Please let me know how the install goes.
Do you use an adhesive on the bushing? I imagine a press fit is difficult to secure without an arbor press.....and really hard to secure on the tractor.
Mine is a CK 30....are the freeze plugs the same size?
DOC
Please let me know how the install goes.
Do you use an adhesive on the bushing? I imagine a press fit is difficult to secure without an arbor press.....and really hard to secure on the tractor.
Mine is a CK 30....are the freeze plugs the same size?
DOC
jabelding
Gold Member
I will let you know how the install goes. I have a Toyota sealant that most people have recommended. Amazon.com: Genuine Toyota Fluid 00295-00103 Formed-in-Place Oil Pan Gasket - 3 oz. Tube: Automotive
It doesn't hold in the bushing the press fit does that, just will seal any small scratches that might leak. I will just tap it in with a long bar and hammer like the others have. Also i want to be sure at full press in depth there is not contact between the bushing and cylinder wall.
I think most of the Kioti engines over 25hp are 32mm freeze plugs.
It doesn't hold in the bushing the press fit does that, just will seal any small scratches that might leak. I will just tap it in with a long bar and hammer like the others have. Also i want to be sure at full press in depth there is not contact between the bushing and cylinder wall.
I think most of the Kioti engines over 25hp are 32mm freeze plugs.