mikehaugen
Elite Member
Who would have thought that this question would have become a "touchy subject?"
"Bionic blade" - worth the extra cost?
- Thread starter Alpha Dog
- Start date
- Views: 40035
Yellowhair42
Bronze Member
- Joined
- Sep 20, 2010
- Messages
- 66
- Tractor
- Ford 5000
MtnViewRanch
Elite Member, Advertiser
- Joined
- Mar 19, 2005
- Messages
- 10,697
- Tractor
- Mahindra 7520, Mahindra 3215HST, Case 580 extendahoe, Case 310 dozer, Parsons trencher, Cat D6,
Well, I guess the ruckus is my fault for using an absolute. 
I should know better, actually do know better, there is almost always an exception to everything. But as usual, due to poor communication, thoughts get misunderstood and we get what we got.
I should know better, actually do know better, there is almost always an exception to everything. But as usual, due to poor communication, thoughts get misunderstood and we get what we got. 
pwright
Gold Member
Not trying to make matters worse but that did seem a bit overly absolute.
I've been meaning to take some pictures of the road in/out of my property to get some input from the brain trust here about maintenance but I keep forgetting to do that.
I do have a video clip of part of the road on YouTube:
You don't get much more "natural surface" than this. Of particular interest on the subject of road maintenance is 1:00 to 1:30.
I just have my little CT225 with a box blade but have considered picking up a LPGS as it does seem like it would help in some areas. The land in general is mostly rock with small amounts of dirt in between. It's either hard like cement or powder or, when wet, really sticky. Unless the rippers are down the box blade mostly just bounces along across the embedded rocks.
Anyway thoughts or suggestions are welcome.
MtnViewRanch
Elite Member, Advertiser
- Joined
- Mar 19, 2005
- Messages
- 10,697
- Tractor
- Mahindra 7520, Mahindra 3215HST, Case 580 extendahoe, Case 310 dozer, Parsons trencher, Cat D6,
Phil, do you want to reshape, or just smooth out? Smooth out, LPGS hands down. Reshape, a good heavy rear blade. When it comes to grading, weight is king. Of course there are limits, usually restricted to the capabilities of the tractor being used. I have a 3215 Mahindra, I use 800lb implements behind it all the time. They work quite well IMO. I would not hesitate to tackle your road, although I would prefer to use my 7520 with 1000+lb implements.
Attachments
pwright
Gold Member
Brian, mostly just keep it reasonably smooth. In some areas I need to do some shaping to help control how the runoff flows during the rainy season as it tends to get erosion ruts on the hilly parts.
k0ua
Epic Contributor
alpha, while I personally do not own one, everyone that has bought one in the last couple of years and posted back here has seemed to be very impressed with it. Also several people have posted their diagrams and photos of ones they have made also seem to be very impressed with them. I know of one person that went into business fixing peoples driveways with the one that he purchased.
/pine
Super Star Member
- Joined
- Mar 4, 2009
- Messages
- 15,763
I'll start this post by honestly saying I have the utmost respect for Brian (as well as so many other contributors here)...and this tete-a-tete (or "dust up" as some seem to see it) has not changed things one iota...! it was never my intent to be confrontational...just my observations and experience...
...Believe me...with so many positive opinions on how well land planes work for so many here...if I thought by any chance that one would work for me I would already have one...
While I'm on the topic of things that seem to work well for others...are gauge wheels on a rake of any benefit when you have a hydraulic side link
back to land planes... FWIW...just out of curiosity I searched CL (all the locales closest to me) and could find none either wanted or for sale... using "search tempest" (searches all of CL) within 250 miles it turned up zero results (except on e-bay)...using my zip they were not listed on the TSC site...
@ Brian,
I am terrible at remembering to take "before" pictures...and right now with so many leaves on the ground it is nearly impossible to take pictures that would help you understand the local "natural" strata...but I did find a few pics that may give you an idea of what I deal with...
Most of the lane work I do is on private drives and not so much heavy traffic roads...most are single track...this is mountainous country with steep grades and controlling storm water run-off is the major issue...
The pictures below hopefully will give you an idea of what I deal with...I almost always use "crusher run" as a topping...usually 3"-4" is all that is required...much of the time the top of the imbedded rocks consume the depth of the topping...trying to remove them all would increase the man hours exponentially...once the topping is applied a rake is about the only implement that will not hang up on the the under lying rocks...lots of these rocks are bowling ball size...some much (much) bigger... some of the rocks pictured were extracted and moved to the side...
...Believe me...with so many positive opinions on how well land planes work for so many here...if I thought by any chance that one would work for me I would already have one...
While I'm on the topic of things that seem to work well for others...are gauge wheels on a rake of any benefit when you have a hydraulic side link
back to land planes... FWIW...just out of curiosity I searched CL (all the locales closest to me) and could find none either wanted or for sale... using "search tempest" (searches all of CL) within 250 miles it turned up zero results (except on e-bay)...using my zip they were not listed on the TSC site...
@ Brian,
I am terrible at remembering to take "before" pictures...and right now with so many leaves on the ground it is nearly impossible to take pictures that would help you understand the local "natural" strata...but I did find a few pics that may give you an idea of what I deal with...
Most of the lane work I do is on private drives and not so much heavy traffic roads...most are single track...this is mountainous country with steep grades and controlling storm water run-off is the major issue...
The pictures below hopefully will give you an idea of what I deal with...I almost always use "crusher run" as a topping...usually 3"-4" is all that is required...much of the time the top of the imbedded rocks consume the depth of the topping...trying to remove them all would increase the man hours exponentially...once the topping is applied a rake is about the only implement that will not hang up on the the under lying rocks...lots of these rocks are bowling ball size...some much (much) bigger... some of the rocks pictured were extracted and moved to the side...
MtnViewRanch
Elite Member, Advertiser
- Joined
- Mar 19, 2005
- Messages
- 10,697
- Tractor
- Mahindra 7520, Mahindra 3215HST, Case 580 extendahoe, Case 310 dozer, Parsons trencher, Cat D6,
So, Slash Pine what implement do you use on what you have there?
As another side note, no LPGS for sale on Craig's list here either. Probably because the people that have them, use them and have no reason to sell them.
As another side note, no LPGS for sale on Craig's list here either. Probably because the people that have them, use them and have no reason to sell them.
/pine
Super Star Member
- Joined
- Mar 4, 2009
- Messages
- 15,763
So, Slash Pine what implement do you use on what you have there?
As another side note, no LPGS for sale on Craig's list here either. Probably because the people that have them, use them and have no reason to sell them.
I only have a 17 HP tractor, that said... For the basic grading (before topping) I mostly use an old,heavy (for my tractor)...about 450#'s M.F. 6' rear blade (I have replaced the crank type cut pitch adjustment with a hydraulic cylinder)... I mostly "pitch and ditch" the lanes rather than crowning (it's heck trying to push water back up a mountain i.e., to a high side culvert etc.)...when I have to remove large boulders that leave big holes I use a 250# BB to scarify the area and fill it with spoil...when starting...after the initial passes I spend a lot of time getting on and off the tractor removing the semi-smaller rocks that the blade turns up...
Once the crusher run topping is applied if I try to use anything but a rake I just get hung up on the tops of the under lying larger rocks which creates havoc and a lot more work...
I don't do this as a full time job otherwise I would have bigger, heavier equipment i.e., a small dozer etc...but I have fun doing what I can do with what I have...
FWIW...after the initial grading is done is is amazing how well just 3"-4" of crusher run holds up...and it is very easy to maintain (collecting and re-distributing) the topping with a rake...
