Blown JD 955 front axle. Anyone source a used unit?

   / Blown JD 955 front axle. Anyone source a used unit? #1  

The Haymaker

Veteran Member
Joined
Jul 11, 2009
Messages
1,282
Location
Benton, Maine
Tractor
2008 T2220
As the subject says, anyone have some ideas? RH side. Looks like a ball popped out of the bottom cup bearing and somehow made its way to the gear, which forced the bearing assembly outward.

Thanks in advance,

E
 

Attachments

  • DSC08246.JPG
    DSC08246.JPG
    60 KB · Views: 729
  • DSC08247.JPG
    DSC08247.JPG
    60.2 KB · Views: 713
  • DSC08248.JPG
    DSC08248.JPG
    59.7 KB · Views: 570
  • DSC08249.JPG
    DSC08249.JPG
    61.1 KB · Views: 670
   / Blown JD 955 front axle. Anyone source a used unit? #2  
Ouch! That is not a pretty site. More than just the cast housing broken?
No chance to replace bearings and seals, and welding cast back together?

Maybe a used parts yard if only alternative.
 
   / Blown JD 955 front axle. Anyone source a used unit?
  • Thread Starter
#3  
Used is what I am hoping someone will come up with. There is a bearing in the bottom of it so even though the housing can probably be welded, getting the bearing snug and lined up again is another issue.
 
   / Blown JD 955 front axle. Anyone source a used unit? #4  
Ouch is right...that brought a tear to my eye:eek: That must have made one he!! of a bang when it went.
 
   / Blown JD 955 front axle. Anyone source a used unit?
  • Thread Starter
#5  
Ouch is right...that brought a tear to my eye:eek: That must have made one he!! of a bang when it went.

"Like a bomb going off" is what my Dad said. There's a pretty good splatter mark in the yard too. Not good, he's going to have a hard time coming up with the cash for this one.
 
   / Blown JD 955 front axle. Anyone source a used unit?
  • Thread Starter
#8  
Update: Some patience and a little 7018 rod.

Will it work? Time will tell. Even at 38, my Dad still amazes me.
 

Attachments

  • DSC08250.JPG
    DSC08250.JPG
    60.3 KB · Views: 423
  • DSC08251.JPG
    DSC08251.JPG
    61.2 KB · Views: 501
  • DSC08252.JPG
    DSC08252.JPG
    61 KB · Views: 357
  • DSC08253.JPG
    DSC08253.JPG
    60.9 KB · Views: 488
   / Blown JD 955 front axle. Anyone source a used unit? #9  
Sorry to see that! I just got through rebuilding my front-end on my 790 which looks real close to yours. It cost me just in part $1360 and that was not all the gears. Maybe a 790 or 990 will work. Know it sucks being planting time and such. One more thing. Have u looked at the shaft in that housing and area to see what caused that to happen? Good luck my friend!
 
   / Blown JD 955 front axle. Anyone source a used unit? #10  
Looking at the very 1st pic. it looks like the bottom drive gear is chunked up some. Maybe not I hope because, that gear alone is $85.
 

Tractor & Equipment Auctions

1996 Dorsey Enclosed Trailer, VIN # 1DTV11520TA252324 (A57453)
1996 Dorsey...
2022 FORD F-250 STX CREW CAB TRUCK (A59823)
2022 FORD F-250...
2006 Freightliner Auger Truck (A56438)
2006 Freightliner...
2019 CATERPILLAR D6 HIGH TRACK CRAWLER DOZER (A60429)
2019 CATERPILLAR...
Case 870 Agri King Loader Tractor (A59814)
Case 870 Agri King...
2014 Chevrolet Silverado 1500 Crew Cab Pickup Truck (A60460)
2014 Chevrolet...
 
Top