Box scraper = chisel plow ?

   / Box scraper = chisel plow ?
  • Thread Starter
#11  
I will be using it in my deer hunting food plots. About 8 inches deep would be plenty.
 
   / Box scraper = chisel plow ? #12  
I will be using it in my deer hunting food plots. About 8 inches deep would be plenty.

If you can't find something local, Give me a zip code and I would be glad to figure a shipping quote for 1 of our products. Ken Sweet
 
   / Box scraper = chisel plow ? #14  
It seems to me that it would work. just be judicious with what you cut away. I think you could get by with just cutting 3-4 inches off the side panels and removing the blades. I can tilt mine and get the rippers down maybe 3-4 inches at the most. Cutting the bottoms of the side panels off shoudl give you 3-4 more. You'd probably have to round off the front corners of the side panels too.

Post pics.
 
   / Box scraper = chisel plow ? #15  
I did a search and looked at the date on the original message!

I need to dig a trench to lay a wire from the meter pole to my shop. I don't want to put the back hoe on the tractor. I'm thinking of using the center chisel on the box to dig the trench.
I don't want to mess up the box.

Any one ever extended/made a shank with cultivator plow that would fill the bill?

Not interested in code/rules/danger etc etc.

RC
 
   / Box scraper = chisel plow ? #16  
You mean like this.
 

Attachments

  • P1010928.JPG
    P1010928.JPG
    151.7 KB · Views: 262
  • P1010918.JPG
    P1010918.JPG
    147.3 KB · Views: 237
  • ripper-red.JPG
    ripper-red.JPG
    224.3 KB · Views: 203
  • subsoiler.gif
    subsoiler.gif
    11.3 KB · Views: 211
   / Box scraper = chisel plow ? #18  
Those subsoilers like in JJ's last pic can be had at TSC for under $200. $149 if I remember correctly.
And if you have access to a welder and some scrap steel, they arent that hard to make either.
 
   / Box scraper = chisel plow ? #19  
That's what I was thinking; a longer bar the same sizes as one of the scarifiers and make a point (optional)on it and blow a hole through the flat side for the pin. If I had a TSC in AZ I wouldn't have to make my own; but what the heck that's half the fun.:thumbsup:

Thanks for the help!!

RC
 
 

Tractor & Equipment Auctions

2012 FREIGHTLINER CASCADIA TANDEM AXLE DAY CAB (A50505)
2012 FREIGHTLINER...
2003 International 4300 1100 Gallon Septic Truck (A48081)
2003 International...
John Deere Ztrak M665 60in Zero Turn Mower (A48082)
John Deere Ztrak...
https://www.accessnewswire.com/newsroom/en/healthcare-and-pharmaceutical/slimjaro-vs-burnjaro-reviews-a-comprehensive-analysis-of-benefits-and-1044755
https://www.accessn...
Mk Diamond MK-101 Wet Tile Saw (A49461)
Mk Diamond MK-101...
2016 RoGator RG1100B Self-Propelled Fertilizer Spreader - Slingshot, Raven Display, Leather Seat (A50397)
2016 RoGator...
 
Top