Branson advise

[Hemihup27]

Well, got some big news in a couple of days! I’ll be sure to keep y’all posted

 

[hornett22]

Stick with the Branson. I like Kubota but the L series is disappointing. Especially for the money.

 

[Boss 302]

I'm interested in hearing how ot all worked out, I know you'll be happy with either.

 

[Cougsfan]

I hope your Branson gets here without delays. I am still waiting for the Garage doors I ordered in May

 

[Dickdorf]

I just bought a Branson 3520h, seems like a well built tractor but no dealers in my area. It didn’t come with an owners manual and so far I haven’t had much luck finding owner/service manuals on line. Seems like Branson is a little stingy with information sharing.

 

[ning]

I found this , It looks similar to mine.

 

[Torvy]

I just bought a Branson 3520h, seems like a well built tractor but no dealers in my area. It didn’t come with an owners manual and so far I haven’t had much luck finding owner/service manuals on line. Seems like Branson is a little stingy with information sharing.

There is a member here (or two+) that works at a big Branson dealership here in North Texas. I am sure someone here can get you hooked up with manuals. Welcome to the forum and congrats on your tractor.

 

[Dickdorf]

I found this , It looks similar to mine.

That is the only thing I was able to find also, but when I download it I only end up with 82 pages of a 162 page manual. Most all the important stuff is is in the part thats left out, unless your interested in how to be extremely safe not get anything done.

 

[ptsg]

That is the only thing I was able to find also, but when I download it I only end up with 82 pages of a 162 page manual. Most all the important stuff is is in the part thats left out, unless your interested in how to be extremely safe not get anything done.

There is a thread here on TBN with the manuals for most Branson tractors, including parts and service manual. I think it's only missing the manuals for the 2021 20 series, for the 3620, 4820 and 5520.

 

[Captsteve57]

There is a member here (or two+) that works at a big Branson dealership here in North Texas. I am sure someone here can get you hooked up with manuals. Welcome to the forum and congrats on your tractor.

Where is that dealership located