beckmurph
Platinum Member
What you describe here, soundslike the normal HST whine.
BX24 REVERSE
- Thread starter RUNNONMT4560
- Start date
- Views: 3360
-
- Tags
- kubota bx24
I would agree. These units to whine alot. Seems like more with heat too. Fluid type really does not matter.
OP
RUNNONMT4560
New member
Is there something that would cause the reverse to not engage when I am on a
up-slope?
up-slope?
keyman1808
Platinum Member
The whine may be normal but the lack of power seems to indicate a definate problem. I know my BX24 has no problem with a load going up a hill. There have been reports of HST failures on here. Hope its not that. When you changed the fluid did you change the filters ?? Clean the screen??
OP
RUNNONMT4560
New member
The problem appears to be mainly in reverse. On a flat surface it is fine. But if I back up an incline, no-go! Very frustrating.
OP
RUNNONMT4560
New member
The pressure in forward is 2700 psi
reverse 1200 psi
reverse 1200 psi
rlsmith
Bronze Member
When backing up do you feel any pulsating or back pressure on the peddle? When you said metal to metal with hydo fluid between, are the brakes on, or maybe adjusted all the way up and no pad left ... and that is in the fluid blocking a port so I fear that it is something in the tranny.
OP
RUNNONMT4560
New member
I believe that your fears are correct. They are going to open it up to determine the cause.
