BX7326 Rear Aux. Kit (install)

[stimpee]

I was wondering about whether these setups would provide enough flow to run a hydraulic implement or not as well? The lines look a bit small to really do the job from a flow perspective for anything that has a hydraulic motor.

Also, an interesting tidbit, after looking at your installation pics, I took a look at my B3030 Sunday night. My rear wheels have 2 studs each, and the rest of them are bolts. Should make re-installing the rear wheels far easier!

Steve

 

[DGS]

Hi mgic
I also posted about ifitting on BX1830 but the guys get tunnel vision and look around an answer
Seeing my Bx has cruise control where he located his lever I would think it will not work on my particular model
Your application may be different
Still waiting for an answer
Regards
DGS

 

[mentat30]

I wouldn't think you could run a hydraulic motor with that type of valve, a hydraulic motor would need a valve made for hydraulic motors. Not sure about the line size.

I wouldn't think you could run a hydraulic motor with that type of valve, a hydraulic motor would need a valve made for hydraulic motors. Not sure about the line size.

 

[blackmajicwoman]

Hi mgic
I also posted about ifitting on BX1830 but the guys get tunnel vision and look around an answer
Seeing my Bx has cruise control where he located his lever I would think it will not work on my particular model
Your application may be different
Still waiting for an answer
Regards
DGS

DGS,
I have a BX1500, which did not have cruise control as an option (something tat I am sure could be added). The interesting thing about that is where I have the black slot on the fender cover is a symbol of s cylinder, which leads me to believe that remotes maybe available for my unit???

 

[actionaj]

Hi mgic
I also posted about ifitting on BX1830 but the guys get tunnel vision and look around an answer
Seeing my Bx has cruise control where he located his lever I would think it will not work on my particular model
Your application may be different
Still waiting for an answer
Regards
DGS

DGS
The valve kit part# for the 1830 is BX7322 and it mounts to the ROPS. Also you have to order a hose kit and the hose kits depend on what other options you aready have on your tractor. The hose kit part#s are BX7323, BX7324 and BX7325. You chose just one depending if you have a loader or not.

 

[pintodeluxe]

Nice job actionaj! That is what all remote hydraulics should look like. I am a fabricator by nature, however I think I will opt for the factory setup if one is available for my BX2230. I would not mind losing the cruise control feature, because I never use that anyway. Cruise control seems dangerous on tractors. At least I don't like the way the cruise control disengages sometimes. I only mow 3 acres, so its not like I'm on the back 40.

Again, Great job and thanks for contributing.

 

[johnray13]

This weekend I installed the BX7326 Rear Aux. Kit on my 2350...

Does anyone know if Kubota makes a kit for a third function loader valve (for a grapple or 4 n 1 bucket) for the BX line?

Thanks- John

 

[mentat30]

Not that I am aware of, I believe that the Rear Aux is kit is the only one. You could run one off of that. Or Rig something up yourself.

 

[johnray13]

I don't think the rear kit will fit because I already have rear hydraulics for the backhoe.

 

[BotaBigot]

I don't think the rear kit will fit because I already have rear hydraulics for the backhoe.

The BX7326 Kit doesn't fit the BX24. Valve location interferes with the subframe, and the pre-bent steel lines/QD mount doesn't fit the 24's ROPS. Don't know if the kit can be adapted...no one's tried/reported back yet. Every time I look at that empty hole in the right fender, I'm tempted to try...