Can you back drag, or back rake effectively with a dual hydraulic grapple?

   / Can you back drag, or back rake effectively with a dual hydraulic grapple? #2  
I back drag with my skid steer rake all the time, usually with the grapple down for better visibility. Mine does have a 3 inch pipe about 10 inches up from the tine points.
20140924_192401.jpg 20141207_160655.jpg
 
   / Can you back drag, or back rake effectively with a dual hydraulic grapple? #3  
It works awesome. I do it all the time. mine has 2 clamps and 2 teeth each. They are on one line so they can raise and lower independently to grab an uneven object like a stump but for back dragging they just level out. 4 teeth is all you need for bushy scrubby stuff usually. it doesn't take much to grab the whole pile.
IMG_20150204_175227_876.jpg
 
   / Can you back drag, or back rake effectively with a dual hydraulic grapple? #4  
The only time I back drag is when the job is done and I'm dressing things up. Not too long ago a friend asked me what disc I used to finish a field. There was no disc, only back dragging with the grapple.
 
   / Can you back drag, or back rake effectively with a dual hydraulic grapple? #5  
Compared to a typical rake grapple that has one lid and many tines, a typical 2 lid L grapple with only 4 tines will not back rake worth a dang. But they can do an "okay" job.

What are you trying to back rake?
 
   / Can you back drag, or back rake effectively with a dual hydraulic grapple? #6  
Compared to a typical rake grapple that has one lid and many tines, a typical 2 lid L grapple with only 4 tines will not back rake worth a dang. But they can do an "okay" job.

What are you trying to back rake?

It will not do dirt, but pulling brush backwards works really well.
 
   / Can you back drag, or back rake effectively with a dual hydraulic grapple?
  • Thread Starter
#7  
Compared to a typical rake grapple that has one lid and many tines, a typical 2 lid L grapple with only 4 tines will not back rake worth a dang. But they can do an "okay" job.

What are you trying to back rake?

Limbs, woody debris, roots from a clear cut
 
   / Can you back drag, or back rake effectively with a dual hydraulic grapple? #8  
A Landscape Rake on the back of your tractor is a great compliment to a grapple for finishing, cleaning up fine debris.
Travis
 
   / Can you back drag, or back rake effectively with a dual hydraulic grapple? #9  
   / Can you back drag, or back rake effectively with a dual hydraulic grapple? #10  
   / Can you back drag, or back rake effectively with a dual hydraulic grapple? #11  
As the title says. How effective are grapples with 2 hydraulic tops,---- at back dragging?

I would think too much debris would get by the top teeth, but thought I would ask.
I haven't needed to back drag with the two lids. I pick up the stuff you mentioned going forward with mine.

I have used the front crossbar to back drag dirt into holes left from trees that I pulled.

P4110004.JPG


P4110007.JPG
 
 

Marketplace Items

CATERPILLAR 262D SKID STEER (A60429)
CATERPILLAR 262D...
2014 Toro Z-Master 6000 Series 60in Zero Turn Commercial Mower (A59228)
2014 Toro Z-Master...
2019 CATERPILLAR 950M WHEEL LOADER (A60429)
2019 CATERPILLAR...
14C SCRAPER (A58214)
14C SCRAPER (A58214)
2020 PETERBILT 567 (A58214)
2020 PETERBILT 567...
2392 (A60432)
2392 (A60432)
 
Top