Creating a Lake

   / Creating a Lake #421  
Eddie,
I was going through some of the earlier posts on your thread and noticed that you refer to Steph as your "girl friend" not too long ago. It's funny how things change in a short period of time. Now she's the famous "wild hog slayer" queen on TBN.
BTW...Oh jeez...I hope I got that right, I seem to have read you guys got married, right?

I love all those pictures of your land and project(s).
 
   / Creating a Lake
  • Thread Starter
#422  
Rob,

Thanks. Our engagment was pretty short. Once I gave her the ring, I was ready to get married. If the family hadn't tried to take over, we still might be engaged, but since we eloped, it happened pretty quickly.

Did you see the pics in the other thread?

Eddie
 
   / Creating a Lake #423  
Bird, that Fisher and 40 hp should be just the ticket. The wife and I caught between 35 and 40 catfish this morning (can legally keep 20 in Kansas, that's what we kept) We fish every weekend if at all possible. Did you get a 4 stroke motor? They are really quite and smooth.
 
   / Creating a Lake #424  
Bill, I've read that the four stroke engines are quieter, heavier, less pollution, less power, may last longer, may not last as long, etc.:D In other words, both pros and cons. Had I been buying a new one, I'd have wanted the four stroke, but this one isn't. In fact, I was also seriously considering a 2002 ProCraft 165 that had a 60 hp four stroke engine but when I took my wife to see it yesterday, they had already sold it. So the one I bought is two stroke with the separate oil reservoir; i.e., oil injection. It'll be interesting to see what the performance is like with a 40 hp engine on a boat rated for up to 75 hp. But I'm sure it will be adequate for me. And while it's a 2003 model, it looks just like the 2006 model.
 
   / Creating a Lake #425  
EddieWalker said:
Did you see the pics in the other thread?

Eddie
Yeah, that's why I was pretty sure, but you know when you get old....
Those pictures where real nice and a beautiful setting. You are a lucky man indeed!
Question...is Steph a better shot than you? hahaha Im sure that Marine Corps training sticks with you for life...Expert Marksman or better, I'm sure.
Eddie, I may have missed this but how large is your lake going to be? And how many acres do you own out there?

Hey Bill,
You and the Misses are fishing fools. I read you were going out in the pouring rain again this weekend anyway??
 
   / Creating a Lake
  • Thread Starter
#426  
Rob,

Steph is a very good shot with the .22 at a target. She's steady and her concentration is amazing. She suffers from buck fever to a small degree and needs some coaching to make the shot. With more experience, she'll be able to concentrate on trigger control, breathing, site picture and bullet placement. What's really interesting is she was watching OLN this morning and getting exited about a caribou hunt. I've shot two types of caribou and would love to hunt the others. Wouldn't it be great is she wanted to go to??

Before the dam was built, and it was just an idea on the dirt where I'd put it, I did some rough measurements. I had to zig around some log piles, guess on the location of the dam and peninsulas. At that time, I came up with close to 240,000 sqare feet.

I really should go out there again and figure it out before the rains get here. If for no other reason, it would be nice to be able to say how big it is and be accurate.

The land is 68.5 acres, but I don't own it. My LLC owns it and I own the LLC.

I took these pictures this morning to give you an idea of the dirt pile to haul out when the dump truck is done. When it's done, and if it's still dry out, I'll make another dirt pile. My goal is to get as much dirt out as I can before the rains get here.

When it gets too wet to keep hauling dirt, I'll close the valve, put in the culverts and let mother nature do her thing. There will be two culverts. One 15 inch on the side that doesn't get much runoff, and an 18 inch in the middle. On the other side, there is an open trench that will catch the majority of my watershed. Overall, there should be 80 to 100 acres of watershed.

Eddie
 

Attachments

  • Lake Marabou 034 (Small).jpg
    Lake Marabou 034 (Small).jpg
    69 KB · Views: 1,416
  • Lake Marabou 018 (Small).jpg
    Lake Marabou 018 (Small).jpg
    52.6 KB · Views: 1,302
   / Creating a Lake #427  
Oh man, those pictures really put it in perspective! That is a HUGE project. I have enough trouble with the little projects I get myself into. That one is on a grand scale. Good luck with the rains this year too.
Keep the updates and pictures coming.
 
   / Creating a Lake #430  
EddieWalker said:
My goal is to get as much dirt out as I can before the rains get here.
Eddie


which is when?


(we got 2" at the property this past weekend)
 
   / Creating a Lake #431  
Eddie,

Recognizing your goal to move the dirt out, but if you don't get it all out that isn't necessarily a bad thing. Those mounds could become islands (underwater) which can help in the effective utilization of deep water. Provides great structure/habitat for fish. The steeper the slope the better on those islands and if they come up to within a couple of feet of the surface they can really be effective.
 
   / Creating a Lake
  • Thread Starter
#432  
Hey Meadowlark,

I agree, it's a win-win situation for me. If didn't do anything, I'd still have a lake well beyond my dreams. Right now, I'm being greedy and trying to get as much dirt out of there as I can.

My deep end is 12 feet and my shallow side is 4 to 6 feet deep. Overall, I'm guessing I'm close to 8 feet down the middle. I'm just trying to get the entire bottom as deep as I can.

I have two very large submerged islands, two medium sized and three small ones. I also have those logs that kind of connect the submerged islands. If my fish arn't happy, then they'll just have to deal with it. hahahaha

I had my Dad pick up the block today since I was busy. He forgot the heads. hahaha

I'll update the thread on the dumptruck engine rebuild in the Construction Equipment section tomorrow when I get some decent pictures.

Eddie
 
   / Creating a Lake
  • Thread Starter
#433  
While waiting on the dump truck, I decided to put my culverts in. The shoreline road will act as a dam for the rain runnoff. I need to channel it to the lowest point and get it under the road and into the lake.

Based on the size of my watershed and extreme rains, I decided to use an 18 inch and a 15 inch culvert. There is also an open trench along my property line that carry the majority of the water shed.

The first picture shows my truck and trailer on the shoreline road.

The second picutre shows the 18 inch culvert in the area I want it to go.

Third picture shows the culvert in the trench with my backhoe. I have a 24 inch bucket and the 18 inch culvert just fits in the trench.

Eddie
 

Attachments

  • Lake Maribou 059 (Small).jpg
    Lake Maribou 059 (Small).jpg
    67 KB · Views: 1,309
  • Lake Maribou 060 (Small).jpg
    Lake Maribou 060 (Small).jpg
    60.4 KB · Views: 1,216
  • Lake Maribou 064 (Small).jpg
    Lake Maribou 064 (Small).jpg
    78.3 KB · Views: 1,293
   / Creating a Lake
  • Thread Starter
#434  
The second culvert is the smaller one. It's only gonna handle about ten acres of watershed, but in a heavy rain, that can still add up to allot of water!!

First picture shows the culvert on my shoreline road.

Second pic shows the trench and a nice flat bottom. For culverts, it's not that big adeal to have a perfect bottom, not like water or sewer lines, but I still try to do a nice job.

The third picture shows my backhoe and in the background, my dozer.

Eddie
 

Attachments

  • Lake Maribou 058 (Small).jpg
    Lake Maribou 058 (Small).jpg
    51.7 KB · Views: 987
  • Lake Maribou 069 (Small).jpg
    Lake Maribou 069 (Small).jpg
    57.1 KB · Views: 918
  • Lake Maribou 068 (Small).jpg
    Lake Maribou 068 (Small).jpg
    65.8 KB · Views: 1,019
   / Creating a Lake
  • Thread Starter
#435  
Now that I have the dump truck running, it's time to remove those dirt piles.

First picture shows a full 6 yard load.

Second and third pictures show the dump truck dumping the dirt off the edge of the dam. I want to build up the width of the dam to creat a large picnic area that is eleveated above the water level and surrounded by shade trees.

Eddie
 

Attachments

  • Dump Truck engine rebuild 042 (Small).jpg
    Dump Truck engine rebuild 042 (Small).jpg
    37.5 KB · Views: 1,150
  • Dump Truck engine rebuild 043 (Small).jpg
    Dump Truck engine rebuild 043 (Small).jpg
    40.6 KB · Views: 1,018
  • Dump Truck engine rebuild 048 (Small).jpg
    Dump Truck engine rebuild 048 (Small).jpg
    33.5 KB · Views: 1,103
   / Creating a Lake #436  
Man, I wish I had that dirt. I could use all of it. Want to ship it to WNY?:)

This project amazes me. You have by far more ambition than anybody I know. It'll be amazing when it's done.

Thanks for keeping us posted.
 
   / Creating a Lake #437  
Eddie,

you gonna pour some concrete on the discharge side of those culverts? They look a little short and close to the day. I've seen that mistake before, couple hard rains and that dirt melts like butter. Plus it looks like that is some top soil instead of the good ole red clay.
 
   / Creating a Lake
  • Thread Starter
#438  
Hi Rob,

I have a pile of busted up concrete that will be used to stop, or at least cut down on the amount of erosion from the culverts. I think it's also called Rip-Rap, but that might just be a term for lining the banks.

The soil you see on that road is from about four feet down in my lake site. There are three main colors of clay on my land. Red, grey and brown. The brown dries to a grayish shade, but it's totally different than my gray clay.

The red and the brown compact real nice and hard. The gray turns to chalk and remaines loose. It won't compact at all. It's worse than topsoil and very difficult to get rid of. I have to bury it with several feet of red or brown clay over it just to get plants to grow. It's completely sterile and nothing will grown on it.

Eddie
 
   / Creating a Lake #439  
Eddie. I'm not sure I followed everything correctly but could you dig as deep and big of a lake as you want... AND THEN run a ditch to it from the "swamp" and perhaps another from the creek to the lake. If you desired it you could put a sluice gate like is used in irrigation in the ditch from the creek so you could control the rate at which youi "borrow" water from the creek. Once the lake is filled you probably wouldn't need to use the control any more.

"Draining" the swamp might firm up its edges enough over time to permit you to dig it out for more lake area. My personal view is better a lake than a swamp.

Since you mention fishing, consider the surface area vs the volume when choosing an average depth. LOts of folks erroneously assume deeper is better. It can be for stock watering as a hedge against periods of drought but not such a good idea for fish.

If the air-water interface area is insuficient to oxygenate the volume of water then the deep water will be oxygen deprived and fish will not be able to live in it. OK, fish will sort of avoid it so what is the problem? Ever hear about a pond "TURNING OVER?" A condition where the density of the bottom non-oxygenated water is less dense that the surface water during temp changes with turn of the seasons. If the non-oxygenated water gets mixed with the other water the result is too low of an O2 content and you lose fish, starting with the most effected species.

You can aereate the water with large bublers and air pumps like a big aquarium. There are windmill type air pumps for aereating ponds. I have even seen a Sevonius rotor type windmill attached by a shaft to an impeller near the bottom of a deep section of pond. Whenever the wind blows, the rotor spins the "prop" at the bottom and stirs the water. Pretty simple actually. Any way you can oxygenate the water sufficiently is a "GOOD" way. Atwoods is selling a small windmill for about $1100. It has a pump at the head. If you pump water up from the bottom and pour it on the surface from a height you will both mix and aereate the water as well as have something interesting to look at.

Depending on the lay of the land you might not have to have a working dam. Just dig out a lake and use the excavated soil to "BURY" the swamp and for other things where you might need a little dirt.

Pat
 
   / Creating a Lake
  • Thread Starter
#440  
Hi Pat. Are you the "Pat" from Countrybynet?? I'm a big fan of your home building project if that's you!!!!

Your pretty close in what you describe as to what I did with the lake. The reason I chose this area was the water it held during the summer. My land is extremely thick jungle. Just about impossible to climb through with all the vines I have. I looked on a topo map and was curious to see what it was like in there, so one day I just pointed the dozer in that direction and started knocking over trees.

I was suprised at all the surfacewater I came across and also pretty scared of getting stuck.

When I decided to put a lake in there, it was still on the assumption that the land would never dry out and I'd be working in wet conditions. Then we had the worse drought in 30 years along with taking out almost 7 acres in trees, it all dried out. I still had surface water in spots, but worked around those.

This year the drought is even worse and the surface water areas are just mildly wet. No water,but darker collored dirt.

The lake is dug down below the water level that I started with 4 to 10 feet. My thinking is, and I know it's a fantasy, but I think that when the rains come back and the water table rises again, that the lake should fill to 80 percent just from the water table. I said it was a fantasy. hahahaha

I dug down below that far and it could happen, I just don't know if it will or not.

If it wasn't for the drought, the lake would probably have turned out a disaster. I don't know, but I had all sorts of crazy ideas on how to clear it and dig it out that I now realize were just plain silly. I started with those assumptions, but fortunately, I didn't have to try any of them.

Here are a few pics that I tool yesterday. The dirt pile is just about gone, but I need to spread some more dirt along the width of the dam. My dam is about 6 feet tall on the outside with the water level rising about 4 feet up it when the lake is full. The inside of the lake is about ten feet deep about 30 or 40 feet from the dam and continues to drop to 12 feet in the middle.

My dam doesn't need to be any wider, but it's more attractive, the wider I make it. I like the gently slope of it and a nice wide open top to walk on. Too many dams that I've come across are barely wide enough for two people to walk on side by side. On mine, you can drive cars in two directions!!! Not that anybody will be allowed to drive on it, but I could if I wanted to. hahaha

Eddie
 

Attachments

  • Lake Marabou 039 (Small).jpg
    Lake Marabou 039 (Small).jpg
    75.2 KB · Views: 1,092
  • Lake Marabou 038 (Small).jpg
    Lake Marabou 038 (Small).jpg
    59.4 KB · Views: 1,014
  • Lake Marabou 035 (Small).jpg
    Lake Marabou 035 (Small).jpg
    53 KB · Views: 1,115

Tractor & Equipment Auctions

5ft Pull-Behind Rotary Tiller Tractor Attachment (A59228)
5ft Pull-Behind...
Deere 35P (A53317)
Deere 35P (A53317)
2006 Ford F-150 4x4 Ext. Cab Pickup Truck (A59230)
2006 Ford F-150...
20 LOWBOY BUMPER PULL TRAILER (A58214)
20 LOWBOY BUMPER...
2022 CATERPILLAR D3 CRAWLER DOZER (A60429)
2022 CATERPILLAR...
iDrive TDS-2010H ProJack M2 Electric Trailer Dolly (A59228)
iDrive TDS-2010H...
 
Top