Danuser F7 finally

   / Danuser F7 finally #1  

footer200

Silver Member
Joined
Oct 4, 2009
Messages
108
Location
Bowmanville Ontario
Tractor
John Deere 4300
I finally found a Danuser auger for sale and it was only 2 miles away.:) I have been looking for an auger for over a year when this F7 came up for sale locally. I called right away to go and pick it up. It only came with 1 12" auger and needs a little TLC but it is a Danuser. I have it all taken apart and sandblasting all of the frame for repainting. I will post some more pics along the process. I would like a large auger as I have a lot of trees I would like to plant.
 

Attachments

  • auger 1.jpg
    auger 1.jpg
    6.1 KB · Views: 434
   / Danuser F7 finally
  • Thread Starter
#2  
I got the frame sandblasted primed and painted this weekend. Looking into the updated driveshaft with the updated safety guards. auger primer.jpgauger paint.jpg I cant not find new U=joints to fit the orignal shaft and need some seals and other parts anyhow.
 
Last edited:
   / Danuser F7 finally
  • Thread Starter
#4  
I ordered the complete F8 update safety kit for my auger and have it all back together and it is working perfectly! When I disassembled it the 2 bearings and races on the pinion where corroded from water penetration so I order new bearings and races from the local bearing supply. The update kit arrived and the 1 bearing came on the pinion so I have a spare bearing. Wasted 38 bucks.
 

Attachments

  • 20140504_105817_resized.jpg
    20140504_105817_resized.jpg
    349.4 KB · Views: 503
  • 20140504_110216_resized.jpg
    20140504_110216_resized.jpg
    403.1 KB · Views: 304
  • 20140504_110137_resized.jpg
    20140504_110137_resized.jpg
    352.4 KB · Views: 325
  • 20140504_141150_resized_1.jpg
    20140504_141150_resized_1.jpg
    465.8 KB · Views: 467
   / Danuser F7 finally #5  
ok, I am seeing your post here. So i may just have to order 1 bearing.
 
   / Danuser F7 finally #6  
I finally found a Danuser auger for sale and it was only 2 miles away.:) I have been looking for an auger for over a year when this F7 came up for sale locally. I called right away to go and pick it up. It only came with 1 12" auger and needs a little TLC but it is a Danuser. I have it all taken apart and sandblasting all of the frame for repainting. I will post some more pics along the process. I would like a large auger as I have a lot of trees I would like to plant.

Hi I have a John Deere 755 and found a used F7 . Is my tractor big enough to handle it ?
Thanks for your time NiftyK
 
 

Tractor & Equipment Auctions

2024 DR Pro 26 26in Walk-Behind Brush Cutter (A45336)
2024 DR Pro 26...
2014 UTILITY 53X102 DRY VAN TRAILER (A45677)
2014 UTILITY...
2024 Top Hat Industries Cool Down Trailer (A45336)
2024 Top Hat...
2013 OZARK  20 T/A UTILITY TRAILER (A47001)
2013 OZARK 20 T/A...
pull behind aerator (A46683)
pull behind...
2012 VVF HEATER (A47001)
2012 VVF HEATER...
 
Top