Diamond C Tilt trailer 48HDT ?

[George2615]

I forgot you bought the deckover. I would guess it does have a steeper angle. I looked at a few deckovers before I bought my PJ and due to the steeper angle of the ones I looked at I decided I didn't need the extra width of the deckover. Mine didn't come with remote but I added one to both my PJ and dump trailer. Price of mine was more than I wanted to spend also. That power up / down and 14K rating sure do add a bit.

 

[Xfaxman]

Hello Fallon...View attachment 534439View attachment 534440My Diamond C trailer came in the other day. I ordered it. 24 foot model 45HDT. I got the full length rub rails/stake pockets, and lockable chain tray in the tongue.

Also...I was wondering...how do you get your pictures to go to the bottom of the post with the writing at the top? My pictures posted at the top in between the writing. It used to not be that way. What do I need to change?

If you are on a computer, the pictures went where the cursor was when you uploaded them.

If you double click the picture, this Image Settings box appears, you can post it as Medium or Full Size, Large onlly works on small pictures less than 556 pixels wide.

Put the cursor where you want the picture, this is Medium:

Large:

 

[Redbug]

Xfaxman...Thank you, Thank you, Thank you! I looked and looked in my profile and settings and did not see anything. Now I know. Thank you!

 

[Xfaxman]

You're welcome.

 

[bspeedy]

Sharp trailer. I bought a 20-foot 14k Diamond C trailer last summer. I am 100 percent pleased with it. Built right. Even the lights are wired with some thought and effort. I coated the deck with some leftover wood stain from another project. Looks good and should protect the wood. Heck, even the tires are great and I'm suspicious of China tires.

 

[Redbug]

Sharp trailer. I bought a 20-foot 14k Diamond C trailer last summer. I am 100 percent pleased with it. Built right. Even the lights are wired with some thought and effort. I coated the deck with some leftover wood stain from another project. Looks good and should protect the wood. Heck, even the tires are great and I'm suspicious of China tires.

I crawled under and over the trailer. I was amazed at the welds. I could not find any bad or skimpy welds. I think they have pretty good QC at the factory.

 

[RichM752]

I'm happy with mine.

 

[bspeedy]

I crawled under and over the trailer. I was amazed at the welds. I could not find any bad or skimpy welds. I think they have pretty good QC at the factory.

I did the same with the same observations. These trailers are a better value than any of the others. I was a bit concerned with the tires as I did not know the brand name. Almost junked them brand new and went with Maxxis or LT tires. Figured I'd give them a try. 70+ mph with 10k loads and they run nice and cool. And they show hardly any wear although I've towed them maybe only a few thousand miles so far.

 

[TMGT]

Waiting on a quote back for a 20ft 48HDT full length deck powered tilt, really like the Diamond C now that I've seem them.

Was looking at the upgraded 3/16 fenders but found out they aren't removable.

How's the clearance at the back with the low profile and long overhang?

 

[RichM752]

I've never had an issue with the clearance on the rear, then again I don't believe I've been off pavement, and steer clear of driveways that have excessive dips/angles. As for the 3/16 fenders, they are stout. Parked next to my dump trailer, I compared the two, and boy what a difference. Then again I sometime bump my dump trailer fenders when loading with the tractor so I need the forgiveness. Diamond C makes a good trailer, I'm sure you'll be satisfied.