DIY Cab for Kubota B2620

[chim]

Mot sure how similar your tractor is, but mine was easy to plumb into the bypass. There's a short 90* shaped hose that's 5/8" on the end that connects horizontally and a smaller one that points down. It was simple to disconnect the 5/8" end and swing it in the opposite direction and couple onto it. The other heater hose is connected into the spot vacated by the short factory hose.

I installed 3 valves near the heater so it can be shut completely off with 2 of them and the third short-circuits the heater for a bypass.

 

[GPintheMitten]

Thanks Chim. I do have something similar bu th not sure of the hose diameter. If I don't get a definitive answer, I'll take it apart and check the dimensions.

 

[tommygun]

nice work

 

[GPintheMitten]

Thanks. I'll try to get better pics soon. I got a little burned out on it but have ordered heater and wipers to put on it.

 

[GPintheMitten]

URL=http://s467.photobucket.com/user/GPintheMitten/media/20140211_104913_zps2yvfpqub.jpg.html]

[/URL]

 

[dragoneggs]

GP... looks awesome! Well done. Visibility couldn't be better! Thanks for sharing.

 

[dragoneggs]

Oh... but add more LED lighting!

 

[GPintheMitten]

Oh... but add more LED lighting!

Got one in the back too with red clearance lights.

It's actually pretty bright but I agree it would look better with 2 lights each front and back.

 

[sixdogs]

That really looks good.

 

[GPintheMitten]

Thanks for the cudos..it's not as pretty as some but it is functional.