Gas cans - really

[DK35vince]

EZ-pour shows you how badly we STILL need a good solution. I would love any can that will pour slowly if I want it slow, and fast if I want it fast. How can this be so difficult?

The No-spill cans can do that.
I replaced all my gas cans with the No-spill cans. By far the nicest working cans I have used. (available for diesel also)
Pour fast, slow or instantly stop with the button.
No-Spill Gas Can - For Life Out Here

 

[ArlyA]

In reading about this, I'm a tad confused. Galvanized cans have been around since long before WWII and now they've become bad for diesel fuel??? Of course fuels and cans have been changed over the years. Nonetheless the Justrite cans we use are galvanized.

No diesel motors were harmed while writing this....

I thought diesel fuel and galvanized cans was a no no?

 

[Sodo]

No,,,,, I think they're referring to if you have to weld it.

:laughing: :laughing: :laughing: :laughing: :laughing:

 

[mguitas]

The No-spill cans can do that.
I replaced all my gas cans with the No-spill cans. By far the nicest working cans I have used. (available for diesel also)
Pour fast, slow or instantly stop with the button.
No-Spill Gas Can - For Life Out Here

you can get a extended spout also.

 

[Eric102]

In reading about this, I'm a tad confused. Galvanized cans have been around since long before WWII and now they've become bad for diesel fuel??? Of course fuels and cans have been changed over the years. Nonetheless the Justrite cans we use are galvanized.

No diesel motors were harmed while writing this....

I've read that diesel can leach zinc from galvanizing which can then mess up some types of injectors and pumps.

It probably isn't an issue if you don't let the fuel sit in the can for long periods but some JD folks have reported their owners manuals specifically state not to use galv. cans.

 

[Zerk]

You can't buy a can without the "safety" features anymore. What you can do is to buy the can, and then buy a new spout which does not have the safety features.

Here's one of those: EZ-Pour HI-FLO Replacement Spout Kit 3��51 by Ez-pour for $9.99 in Fuel Transfer - Lube Equipment - Air Compressors - Automotive : Rural King

I have found one of the newfangled cans which actually works quite well. Just push the pour spout down and the fuel glug-glugs its way into the tank. It's not as fast as the old-fashioned cans with their vents, but it's far better than anything else I've tried. One big benefit is that it keeps debris and bugs from crawling down the spout, as it seals right at the opening by spring action. To me, that benefit is worth the hassle of the glug-glug. I don't know the brand of it, though....


Remember, moisture is your enemy. Keep it out of your fuel.


As for plastic cans.... well, rust in your fuel is no fun, either. Plastic doesn't rust.

I have done two cans. I forgot how fast they can pour.

Sad that we have to spend 10 bucks.

 

[s219]

I thought diesel fuel and galvanized cans was a no no?

Huge no no.

I've read that diesel can leach zinc from galvanizing which can then mess up some types of injectors and pumps.

It probably isn't an issue if you don't let the fuel sit in the can for long periods but some JD folks have reported their owners manuals specifically state not to use galv. cans.

That is correct, although it's not "leaching" -- it's the sulfur reacting with the zinc.

 

[arizona98tj]

That is correct, although it's not "leaching" -- it's the sulfur reacting with the zinc.

So if one is using ultra-low sulfur fuel vs. the higher sulfur content off-road diesel, that may make a big difference as to how the galvanized fuel container reacts?

 

[Catman8]

I'm getting the metal can - no more plastic.

I cannot believe that people are saying that plastic fuel containers are great, I'm 50 years old and I'm sick of everything being made out of plastic, it cracks, leaks, breaks, expands. Can people honestly say that plastic is good, every consumer product that is made out of plastic fails, and we the consumer keep getting ripped off. I can't tell you how many household items I throw in the trash every year that's made out of plastic that fails. These Just rite containers work perfect, I just filled up three today, and had them in back of my jeep and they did not leak one drop and I could not smell any fumes, and they pour perfect and you can control the flow. So please, enough with the plastic is great stories, I'm not buying it.

 

[MossRoad]

I cannot believe that people are saying that plastic fuel containers are great, I'm 50 years old and I'm sick of everything being made out of plastic, it cracks, leaks, breaks, expands. Can people honestly say that plastic is good, every consumer product that is made out of plastic fails, and we the consumer keep getting ripped off. I can't tell you how many household items I throw in the trash every year that's made out of plastic that fails. These Just rite containers work perfect, I just filled up three today, and had them in back of my jeep and they did not leak one drop and I could not smell any fumes, and they pour perfect and you can control the flow. So please, enough with the plastic is great stories, I'm not buying it.

I'm sure there's plenty of folks here on TBN that can tell you they had metal cans fail. I've had several fail. So did my father. I still have my father's plastic cans. And I still have my plastic cans. To each his own, but no need to be rude about it.

 

[Creamer]

I cannot believe that people are saying that plastic fuel containers are great, I'm 50 years old and I'm sick of everything being made out of plastic, it cracks, leaks, breaks, expands. Can people honestly say that plastic is good, every consumer product that is made out of plastic fails, and we the consumer keep getting ripped off. I can't tell you how many household items I throw in the trash every year that's made out of plastic that fails. These Just rite containers work perfect, I just filled up three today, and had them in back of my jeep and they did not leak one drop and I could not smell any fumes, and they pour perfect and you can control the flow. So please, enough with the plastic is great stories, I'm not buying it.

There are a lot of things that are done out of plastic that cannot be done with metals - at least not cost effectively. There are many things that are much better out of plastic but each material has its negatives. All automotive gas tanks changed to plastic 20 years ago because of permeation - hydrocarbon leakage through the material. With plastics they were able to put a barrier layer into the wall of the tank to significantly reduce the permeation. it still amazes me today that our gas 'cans' are not multi-layer for this same reason.

 

[Musdalen]

I cannot believe that people are saying that plastic fuel containers are great, I'm 50 years old and I'm sick of everything being made out of plastic, it cracks, leaks, breaks, expands. Can people honestly say that plastic is good, every consumer product that is made out of plastic fails, and we the consumer keep getting ripped off. I can't tell you how many household items I throw in the trash every year that's made out of plastic that fails. These Just rite containers work perfect, I just filled up three today, and had them in back of my jeep and they did not leak one drop and I could not smell any fumes, and they pour perfect and you can control the flow. So please, enough with the plastic is great stories, I'm not buying it.

I think you are being rather ridiculous if you stop and read these posts. There are people here with plastic cans that are decades old and still working.

I have two JustRite cans myself and BOTH lead around the pour spout. I only put 4.5 gals in them when I fill them because they will leak all over my truck in the 2 mile ride home. The fumes are bad enough that I would never take them in the wife's Escape. They go only in the back of the pick up where they can leak fumes all they want. But they are still good cans, just not ideal.

I started this thread, not because I was looking for metal cans per se, but because I want better pour spouts than what I see in the cans on shelves in most stores now. I didn't know about the flexhose JustRite cans until then. They might be what I end up with, but someone in this thread noted that they too can leak in the flex part.

I just saw a video yesterday with a 15 or 20 yr old Dolomar PLASTIC chainsaw can that was just about ideal. Being moulded of plastic, it had tank for chain oil and a tank for gas that were all part of the same unit. Looked slick and the owner clearly liked it. No way you could make that from metal at a reasonable price.

 

[Oldoak]

Musdalen, I believe you nailed it! :thumbsup:

I guard my old plastic gas cans (vented/with rigged spouts) like gold. A couple of which are 25+ years old. Five dollars for a 5 gallon can, less when they were on sale, by the way.

Catman8, you don't have to buy anything. Those of us who like plastic gas cans are just sharing our actual experience and what we about them. No need to get upset because you have a different opinion of plastic gas cans. :confused3:

 

[s219]

So if one is using ultra-low sulfur fuel vs. the higher sulfur content off-road diesel, that may make a big difference as to how the galvanized fuel container reacts?

Offroad diesel is identical to on-road diesel but with red dye added. Both are ULSD.

 

[Dadnatron]

I use 5 - 5 gal yellow plastic TSC cans. I leave the generic spout on, simply because it keeps the diesel in the can.

When I fill the tractor, I use one of the yellow funnels that attach directly to the can. I would highly recommend it. It makes filling as fast as you can pour from the can. Just switch it from can to can as you go.



Eagle Safety Gas Can Replacement Funnel Made in USA | eBay

 

[Musdalen]

The heck with the cans, I like those dogs!!!

I'll look around for that funnel too. Looks like the cat's meow actually.

 

[MossRoad]

Yellow dogs, yellow cans.

 

[jhays]

View attachment 499337Try one of theses nospill plastic cans.

My no-spill didn't come with that extension hose, is that something you added?

 

[Soundguy]

I don't know if you can get these anymore but I have four and they are great. I have the original GI - 5 gallon - cans and a simple steel flex nozzle. You might look in one of those GI surplus stores.

HF used to sell metal jerry cans. I never checked what spout they had, but the cans looked good anyway.

 

[ArlyA]

Eagle class II safety cans - really

I'm a bit surprised of the plastic fuel cans following we have here. Nonetheless, here are the reasonably priced Eagle steel cans we use, and the plus side of them is they don't leak. We have many more cans than whats pictured here. These get carried on machines and occasionally do fall out. That is why some are dented as seen in the group shot. No they are not perfect but at $60 each, they are good enough for us kids. They've worked well enough, I purchase one for home use. I should add, we do beat the snot out of them here and we must have these flex spouts.