CAB/AIR5225
Silver Member
CLICK THE LINK BELOW FOR A VIDEO OF IT IN ACTION!100_3036.flv video by highrpm955 - Photobucket
Got the Hydro Toplink installed
- Thread starter CAB/AIR5225
- Start date
- Views: 3046
CLICK THE LINK BELOW FOR A VIDEO OF IT IN ACTION!100_3036.flv video by highrpm955 - Photobucket
IslandTractor
Super Star Member
- Joined
- Sep 15, 2005
- Messages
- 16,647
- Location
- Prudence Island, RI
- Tractor
- 2007 Kioti DK40se HST, Woods BH
It's upside down! (Just in comparison to how I installed mine.) If the hoses are pointed down they are less likely to get snagged IMO. Obviously it works both ways though.
(Just in comparison to how I installed mine.) If the hoses are pointed down they are less likely to get snagged IMO. Obviously it works both ways though.
nmu98
Veteran Member
- Joined
- Jun 1, 2007
- Messages
- 1,132
- Tractor
- JD 5203, JD 3720, JD 4110, JD 445, IH 1586, IH 886, IH 404......
Nice, clean install.... Did you get it from CCM or Surplus Cemter?
OP
CAB/AIR5225
Silver Member
Thanks! If I had put in on valve side down , the hoses would have rubbed on the PTO shield when it was in the proped up position. I got it from Surplus Center....I never could get anyone from CCM to order one for me (too busy). I was second guessing my order shortly after I had placed it, wondering,"do I really need this thing?".....I am so glad I got it. As you can see from the video link, it is VERY easy to hook up an implement. You can really make some small incremental adjustments with a steady hand. I have found no need to "bump" the lever. Works great along with the Imatch hitch!
BlacknTan
Platinum Member
Very nice!
The quick hitch and hydro top link seem like they're made for each other..
The quick hitch and hydro top link seem like they're made for each other..
Big Bri
Platinum Member
- Joined
- Jun 9, 2009
- Messages
- 935
- Tractor
- Kubota MX5100
what does something like that cost?
OP
CAB/AIR5225
Silver Member
$199.00 for the Toplink. 6 bucks a hose. plus shipping...
Therios Pendragon
Bronze Member
What an awesome addition/upgrade... Gonna take your example an get one myself! I just need to work out another hydraulic valve. But I need one for a soon to come grapple anyway.
Thanks for the post!
Thanks for the post!
actionaj
Gold Member
Really nice set up thanks for the vids.
Johndeere3720
Padawan Tractor Learner, Advertiser
- Joined
- Mar 14, 2009
- Messages
- 6,486
- Location
- NW Oregon
- Tractor
- Bobcat T650, MT55, E42R, E10, John Deere 4410, 4200, x500
I need one of those for boxblading. Check out this thread Pictures of you on your tractor - TractorByNet.com
jas67
Platinum Member
Probably wondered how you lived without it. I know I did!
Double Orange
Platinum Member
[/IMG]This was very easy to do. Best of all, no leaks!
100_3036.flv video by highrpm955 - Photobucket
Photo shopped.
If this was a real picture and installed by me. Where are the blood droplets
