Grand L front snowblower/loader compatibility

   / Grand L front snowblower/loader compatibility #1  

dannyk

Silver Member
Joined
Jun 14, 2001
Messages
179
Location
Northern Minnesota
Tractor
Kubota and John Deere tractors 20-40HP; skid steer loader
I'm thinking of trading my Bobcat 753 for an L3430 after I'm finished with my trail work in the woods.

I would like to hear from Grand L owners who use the front mount snowblower and also have the LA723 loader. Specifically, how easy or difficult is it to go from the loader to the snowblower? Are the two subframes compatible so that there is minimal hardware to remove, or is it a pain in the butt?

My understanding (perhaps incorrect) is that much of the mmm hardware is not compatible with the mounting hardware for the snowblower.

Can anyone set me straight on this? Many thanks.

Danny
 
   / Grand L front snowblower/loader compatibility #2  
I am not sure about the compatibility of the FEL and Snowblower. But from post on the B3030. It looks like the only problem would be the front grill guard. Here is a good picture of front end of a L3130. Click Here
When I did a search for L series tractors on TBN . I did not find one that listed a front snowblower. /forums/images/graemlins/frown.gif
Here is a link to a post on a B series tractor with front snowblower. PTO Power - b7800 vs l3130 Discussion is about PTO power to run front mount snowblower.
 
   / Grand L front snowblower/loader compatibility
  • Thread Starter
#3  
Thanks, Ron. That's helpful.
 
   / Grand L front snowblower/loader compatibility #4  
I have a L5030, an 853 FEL and a front mount snowblower and have thought, but not actually confirmed, that even with the snowblower subframe mounted I should be able to mount the FEL. Like I said, I've not tried it but it sure looks like there is no reason it wouldn't work.
 
   / Grand L front snowblower/loader compatibility #5  
I don't have an L but with my B2910 I can have the blower sub frame on and use the loader. However I do have to remove the blower sub frame to mount the mower (beller mower framing can stay all year). It is only 4 hoses and one lever/ pin to hook up or disconnect the blower plus the pto. Very easy take about 5 min. total on a good day 15 on a bad.
 
   / Grand L front snowblower/loader compatibility #6  
dannyk

This is from what I have heard the BEST snowblower out there as of now. Very easy on and off 5 mins tops. Works off you rear PTO which is really nice. I may get one next yeat if funds allow it.
SNOW BLOWER
 

Marketplace Items

2012 GENIE Z-45/25J ELECTRIC BOOM LIFT (A60429)
2012 GENIE...
DEUTZ MARATHON 60KW GENERATOR (A58214)
DEUTZ MARATHON...
2021 Takeuchi TL10V2-2 Track Loader with 76in Tooth Bucket (A61306)
2021 Takeuchi...
2018 GENIE Z40/23N RT ELECTRIC BOOM LIFT (A60429)
2018 GENIE Z40/23N...
2019 KOMATSU D155AX-8 CRAWLER DOZER (A60429)
2019 KOMATSU...
2015 FREIGHTLINER M2 26FT CDL REQUIRED BOX TRUCK (A59905)
2015 FREIGHTLINER...
 
Top