Home Depot Bulldog 700 4x4 UTV?

[KubotaToy]

I never messed with the governor, if I remember correctly, it is a spring type. I think you would need to change the spring to get higher RPM (I am sure it is set conservative by the factory and could be upped a bit). I never hit the governer until I moved the foot lever stop bolt to give a little more throttle, yours may already be set at that point.

 

[MotorSeven]

Hmmm...foot stop lever bolt.....hmmm. But I would NEVER mess with that because it would void the warranty....."I know that, don't you think I know that?" ...Attorney Nathan Thurm, Saturday Night Live:laughing:

 

[DT86]

The side view picture with the guy waving, it looks to me that the front tires are bigger than the rear????? Just wondering...

Yeah they really do look a lot bigger. Don't suppose someone put them on bass ackwards do you?

 

[milkman]

The front wheels do look bigger, but according to the specs they are the same, 25x10x12. Maybe it's just an optical illusion.
http://www.homedepot.com/catalog/pdfImages/df/df1e28dd-9d0c-482d-8568-ade9aafaa7a1.pdf

 

[MotorSeven]

It is an illusion, but the rear wheel was down in pressure so I topped them all off today and checked the lug tightness.

I really like to see this on the back, even though many foreign parts are used, they are assembled in my home state:

And what the heck are these two side by side sprockets with chain on them? All they do is wrap around the drive shaft coming from the front Dif:

 

[KubotaToy]

And what the heck are these two side by side sprockets with chain on them? All they do is wrap around the drive shaft coming from the front Dif:

That looks like the rear diff in the picture, if so, the double sprocket chain drives your front wheels in 4 wheel drive. The cable with the lever locks your rear diff so both rear wheels pull.

 

[aczlan]

And what the heck are these two side by side sprockets with chain on them? All they do is wrap around the drive shaft coming from the front Dif:

That's a "Double Chain Coupler" it allows for a little bit of difference in angle between two parts and is an easy way to mate different shaft types together.

Aaron Z

 

[ruffdog]

The Kubota RTV's are also assembled down south in Gainesville, GA. Kubota Tractor Corporation - Company News | Kubota Adds Manufacturing Capacity for RTV Utility Vehicle Production

 

[RandyT]

That's a "Double Chain Coupler" it allows for a little bit of difference in angle between two parts and is an easy way to mate different shaft types together.

Aaron Z

It basically is two chains put together with extra long roller pins. As a Sportworks service center I have had them apart for repairs on other models of Sportworks units.

 

[ruffdog]

The Kawasaki Mule's have been made in Lincoln Nebraska for YEARS. They were the first to build a factory over here in 1974. Kawasaki Motors Manufacturing Corp., USA - Kawasaki Motors Corp USA