I did it. Roast and discuss my choice. (sharing experience + numbers for others)

   / I did it. Roast and discuss my choice. (sharing experience + numbers for others) #111  
I believe it was a color thing with the black Por 15. That color absorbed uv rays rather well and it disintegrated the product. I painted one of my vehicle chassis w black POR 15 and it lasted a year. I did not think to top coat it
Interesting...
I would not have thought that a vehicle chassis would get much, if any UV exposure. Maybe some reflective, but to destroy the coating in a year?
I'm wondering if something went wrong in the prep, that could have resulted in the coating flaking or peeling. Did you contact POR15 regading this?
 
   / I did it. Roast and discuss my choice. (sharing experience + numbers for others) #112  
Interesting...
I would not have thought that a vehicle chassis would get much, if any UV exposure. Maybe some reflective, but to destroy the coating in a year?
I'm wondering if something went wrong in the prep, that could have resulted in the coating flaking or peeling. Did you contact POR15 regading this?
No I did not contact the company. I scraped off the big rust flakes and according to the product sig, "painted over rust". I did no prep after that so it could be user error.
Only other things I can think of are two: 1. I did a lot of welding while the vehicle was in the garage while welding and 2. We have a "crushed stone" driveway landing and the stones being light in color, reflected quite abit of light up into the chassis.
 
   / I did it. Roast and discuss my choice. (sharing experience + numbers for others) #113  
I think they are saying "paint over prepped rust". There's 2 steps to follow before coating, according to their Prep Procedure
 
   / I did it. Roast and discuss my choice. (sharing experience + numbers for others) #115  
I like is Kodiak
I have the 10 ft HD, 2 spindle. Bought it used and have used it to cut hundreds of acres. Very, very good finish when properly setup.

CT
 
   / I did it. Roast and discuss my choice. (sharing experience + numbers for others) #116  
I got it stuck within 15 minutes
You stuck it well, friend.

Had LS P7010C for 8 years, never stuck. Last year, stuck it 2x. About like you did. Required another tractor of equal size to get me out.

CT
 
   / I did it. Roast and discuss my choice. (sharing experience + numbers for others)
  • Thread Starter
#118  

Tractor & Equipment Auctions

CUMMINS ONAN SD 2000 GENERATOR (A55745)
CUMMINS ONAN SD...
2017 Ford F-150 Crew Cab Pickup Truck with Liftgate (A55852)
2017 Ford F-150...
2007 Anderson 25ft T/A Flatbed Equipment Trailer (A55852)
2007 Anderson 25ft...
Adams 5T High Clearance Fertilizer Spreader (A55301)
Adams 5T High...
(20) Pack of New HD Black Bungee Tie Down Straps (A54865)
(20) Pack of New...
UNUSED FUTURE XGJ 40" MINI HYD ROTARY TILLER (A52706)
UNUSED FUTURE XGJ...
 
Top