Installation Instructions for Installing the 40 Amp Alternator Upgrade Kit on a B7800
- Thread starter bialecki
- Start date
- Views: 21111
-
- Tags
- kubota b7800
valleydweller1
Silver Member
Re: Installation Instructions for Installing the 40 Amp Alternator Upgrade Kit on a B7800
Thanks for the instructions Dennis! I installed the kit on my B7510 the other day. Pretty much the same with a minor dipstick clearance problem due to one less cylinder on the engine. Things are a little tighter apparently!
Greg
Thanks for the instructions Dennis! I installed the kit on my B7510 the other day. Pretty much the same with a minor dipstick clearance problem due to one less cylinder on the engine. Things are a little tighter apparently!
Greg
/ Installation Instructions for Installing the 40 Amp Alternator Upgrade Kit on a B7800
#25
bandit67
Veteran Member
- Joined
- May 27, 2004
- Messages
- 1,610
- Location
- Lake Hartwell, SC
- Tractor
- 2012 B3000 HSDCC 2020 Z251 Zero Turn
Re: Installation Instructions for Installing the 40 Amp Alternator Upgrade Kit on a B7800
For anyone looking to do this upgrade themselves, pay special attention to the parts of Dennis' instructions that talk about re-bending the existing dipstick and not installing the new, smaller dipstick supplied in the kit.
I ordered the alternator option on my new tractor and it came to me with the new, shorter dipstick installed. The only problem with that is that I now have to remove the front grille, so that I can then remove the side engine panel in order to check the oil level. With the replacement dipstick, I cannot check the oil by just opening the hood, which is what you can do by following Dennis' recommendations.
For anyone looking to do this upgrade themselves, pay special attention to the parts of Dennis' instructions that talk about re-bending the existing dipstick and not installing the new, smaller dipstick supplied in the kit.
I ordered the alternator option on my new tractor and it came to me with the new, shorter dipstick installed. The only problem with that is that I now have to remove the front grille, so that I can then remove the side engine panel in order to check the oil level. With the replacement dipstick, I cannot check the oil by just opening the hood, which is what you can do by following Dennis' recommendations.
