Is there a easier way to adjust width on 3 point?

   / Is there a easier way to adjust width on 3 point? #11  
I Forwarded this thread to Mark.
 
   / Is there a easier way to adjust width on 3 point? #12  
Mark is awesome to work with and the stabilizers are awesome. I love them.
 
   / Is there a easier way to adjust width on 3 point? #13  
Mcaveman my picture wouldnt upload from the ipad but heres an earlier post. #7 has my pics with Stabilzers and Pats. I have/had Pats speader bar but it was bending since it was hitting one of my implements, and you still have to mess with the turn buckles to keep it from swinging, etc. Still kind of a pain in the ...These Stabilizers cured both problems and it only takes seconds to adjust. Mark has excellent craftsmanship, but I understand he's very busy and far behind. Good luck.

http://www.tractorbynet.com/forums/...g/309751-need-3-pt-hitch-bx25.html?highlight=
 
   / Is there a easier way to adjust width on 3 point? #14  
I've had a PATS for quite a few years. Love 'em. I use the width adjustment the tractor has...no problems.
 
   / Is there a easier way to adjust width on 3 point? #15  
DSCF0393.jpg

There's a good reason why Kubota puts a similar system on the deluxe B's and on up the line. The economy series B's and the BX's with turnbuckles? No way. I've had them. No thanks. Everyone has to find what's right for them and their operation, but I'd not have a small Kubota without these. Life is far, far too short. Best mod, for me, ever.
 
   / Is there a easier way to adjust width on 3 point? #16  
Email from Mark today:

Mike,
I got real behind on orders; I couldn't fill them as fast as they were coming in, so I took down the website to catch up, and to make some decisions. I can be reached at this email address- markhdg@gmail.
Blessings,
Mark
 
   / Is there a easier way to adjust width on 3 point? #17  
When you consider how many Kubota B series and BX's there are out there, and the number of guys wanting Mark's upgrade, I can completely understand how swamped he has been these past couple of years. He got so many orders off TBN that his family probably told him to cool his jets, 'cause mama wanted to see her man and the kids needed to know they had a daddy. hahaha.

Probably overwhelmed. Sounds like he's had to pace himself a bit and that's alright, Mark. You do what you gotta do.
 
   / Is there a easier way to adjust width on 3 point? #18  
When you consider how many Kubota B series and BX's there are out there, and the number of guys wanting Mark's upgrade, I can completely understand how swamped he has been these past couple of years. He got so many orders off TBN that his family probably told him to cool his jets, 'cause mama wanted to see her man and the kids needed to know they had a daddy. hahaha. Probably overwhelmed. Sounds like he's had to pace himself a bit and that's alright, Mark. You do what you gotta do.

Don't forget about the L's unless it's a grand L.
Mark's great to deal with up front about How long you may have to wait for a set.
 
   / Is there a easier way to adjust width on 3 point? #19  
Don't forget about the L's unless it's a grand L.
Mark's great to deal with up front about How long you may have to wait for a set.


Not sure what Mark charges, but you can get a set of stabilizers for the L from Kubota for $175 (that's retail, dealer's price may be lower). Wholegoods part # L8430. I have them on my L3200.
 
   / Is there a easier way to adjust width on 3 point? #20  
For a BX size tractor, I think mine were $130-140 or so.
 

Tractor & Equipment Auctions

2018 VOLVO ECR88D EXCAVATOR (A50458)
2018 VOLVO ECR88D...
2021 John Deere 5045E  Only 86 Hours, Loader Ready, 2WD, Canopy (A50397)
2021 John Deere...
2010 Volkswagen Jetta Sedan (A48082)
2010 Volkswagen...
UNUSD KJ 11' X 19' SINGLE STEEL CARPORT (A50460)
UNUSD KJ 11' X 19'...
UNUSED MOWERKING SKID STEER PALLET FORKS (A50460)
UNUSED MOWERKING...
2016 Ford F-250 Knapheide Service Truck (A48081)
2016 Ford F-250...
 
Top