Is there anyone that can lathe a bushing?

[npalen]

I would be lost without the lathe in our garage. It's amazing the number of times it has helped complete a project or repair. The trick is keeping small amounts of various sized materials on hand which isn't always cheap.

 

[stuckmotor]

When I take something like that to my local bearing distributor, the counter man picks up a caliper, takes some measurements, looks in his computer and brings me one from stock or orders it from another store in his chain that has one. Your bearing house will probably do the same thing.

 

[jmc]

When I take something like that to my local bearing distributor, the counter man picks up a caliper, takes some measurements, looks in his computer and brings me one from stock or orders it from another store in his chain that has one. Your bearing house will probably do the same thing.

And all for just a few dollars.

 

[Diggin It]

We don't even know what the OP wants done. Duplicate/replace the part? Turn the OD down on the one shown? Turn the length shorter (which could be done on a grinder)?

 

[Aquamoose]

I actually took it to 2 places that supply bearings & gears and upon cross checking what they have, found none. It came off a Kenworth truck seat that was missing a bushing. Kenworth doesn’t sell just this bearing as it’s part of a $400 assembly. It’s part of a pivot. Looked online without any luck. At this point, I’d be happy to pay to get it made.

I’m looking to duplicate this part as it came with 3 when it was supposed to be 4.

 

[docone]

If you can find a shouldered bushing slightly larger than that, (most ag supplies in stock) hand tuning it should be fairly easy.

JMHO

 

[grsthegreat]

McMaster-Carr

McMaster-Carr is the complete source for your plant with over 595,000 products. 98% of products ordered ship from stock and deliver same or next day.

www.mcmaster.com

 

[CADplans]

Might be worth looking on Amazon,, I typed in 1" long bushing, this popped up,,

 

[Aquamoose]

Tried McMasters, tried eBay. No go

 

[5030]

I actually took it to 2 places that supply bearings & gears and upon cross checking what they have, found none. It came off a Kenworth truck seat that was missing a bushing. Kenworth doesn’t sell just this bearing as it’s part of a $400 assembly. It’s part of a pivot. Looked online without any luck. At this point, I’d be happy to pay to get it made.

I’m looking to duplicate this part as it came with 3 when it was supposed to be 4.

View attachment 704229

View attachment 704230

View attachment 704231

View attachment 704232

View attachment 704233

Try another dealer. Truck seats are generic and National Seating makes the majority of them.