Hey all,
SO on 11-16-2013. I purchased a package deal on a new CS2410 with FEL and MMM with a box blade. The unit did well until about the 55hr mark where a weld busted on the back 3 point stabilizer (part # 14 not sure of exact name but ok not so bad); luckily they were able to order me a new one and ship it to my home due to a hardship on my location to a dealer ~160 miles away.
Then I had a another incident at 61hrs where it would not start, kept blowing the starting fuse- I had to whence it on a trailer and drive all the way to the dealer to drop it off and wait 3 months for it to get fixed and still had to pay $110 for unwarrantable labor to the unit. It had wound up that the starter was completely dead.
Just last night (on 10-29-14)I was mowing with the MMM and at 64hrs the power steering went out and all of a sudden I felt warm on my leg! I looked down and hydraulic fluid was spewing all over the place!! I immediately killed the unit and got off to inspect what looks to be either a complete failure / fracture to the metal pump housing or perhaps a fracture to a hose line that it is connected to, I cannot see it to make it out. Either way now there is about 3 gallons of fluid all over my lawn- lost my clothes- and I am having to watch the animals don't get into the mess
So again after only 4hrs I am going to have to whence it on a trailer and drive it back over for the dealer for repair.....
I know this unit has a warranty and I am thankful for that, but are these typical failures that happen to these units? Is it possible I was sold a lemon? I would love to hear back from any of you as soon as possible to see what some options on this are as I am becoming tiresome of having to return to dealer for repairs on a tractor that I have not had for a year and hardly has any hours on it.
I already sent an email to Kioti and called and left messages on the "customer relations" department answering machine but haven't heard back form them yet.....
Any help is appreciated guys!
SO on 11-16-2013. I purchased a package deal on a new CS2410 with FEL and MMM with a box blade. The unit did well until about the 55hr mark where a weld busted on the back 3 point stabilizer (part # 14 not sure of exact name but ok not so bad); luckily they were able to order me a new one and ship it to my home due to a hardship on my location to a dealer ~160 miles away.
Then I had a another incident at 61hrs where it would not start, kept blowing the starting fuse- I had to whence it on a trailer and drive all the way to the dealer to drop it off and wait 3 months for it to get fixed and still had to pay $110 for unwarrantable labor to the unit. It had wound up that the starter was completely dead.
Just last night (on 10-29-14)I was mowing with the MMM and at 64hrs the power steering went out and all of a sudden I felt warm on my leg! I looked down and hydraulic fluid was spewing all over the place!! I immediately killed the unit and got off to inspect what looks to be either a complete failure / fracture to the metal pump housing or perhaps a fracture to a hose line that it is connected to, I cannot see it to make it out. Either way now there is about 3 gallons of fluid all over my lawn- lost my clothes- and I am having to watch the animals don't get into the mess
So again after only 4hrs I am going to have to whence it on a trailer and drive it back over for the dealer for repair.....
I know this unit has a warranty and I am thankful for that, but are these typical failures that happen to these units? Is it possible I was sold a lemon? I would love to hear back from any of you as soon as possible to see what some options on this are as I am becoming tiresome of having to return to dealer for repairs on a tractor that I have not had for a year and hardly has any hours on it.
I already sent an email to Kioti and called and left messages on the "customer relations" department answering machine but haven't heard back form them yet.....
Any help is appreciated guys!