New Kubota Factory

[Scooby074]

That is GM, or at least that is how it is in the Ft Wayne plant

Your comment and the others jives with what i remember.

Heres another jewel. I know of a Ford dealership that went as far as FIRING employees that refused to drive ford.

He didnt come out and say "Your fired for not driving Ford" but looked for other ways to get rid of the mechanics.

Id imagine that firing someone because of the car they drive would get you brought up before the labour relations board, so im sure he had other "valid" reasons, but the truth is he thought it "looked bad" for other brands to be parked on the lot.

 

[grsthegreat]

They aren't all bad but a lot are. I've witnessed that close up and personal at break time at the Jeep Plant on Stickney Avenue in Toledo. Mad dash to the car to toss downa brew and smoke up the interior, a telltale sign is closed windows in the summer.......

Tell us, how many auto plants in Idaho? At least unionized ones.....:laughing:

Are potato pickers unionized???:laughing:

i didnt always work/live in idaho. I have friends that worked and currently work union jobs in Washington, firms like Boeing , and others that worked for GM. There all respectable hard working people, and i feel that saying all Union people are dope smoking lazy sacks isnt right.

I was Union electrician in Wash state, and we worked our butts off. It was our goal to work HARDER than the non union shops. Slackers were sent hiking.

I want to unionize potato pickers... so we can label all potatoes "Union Made"

hehe

 

[ericher69]

Guys;

I'm no moderator but...

What happened to the OP title "new kubota factory"

Up North in Canada we welcome any jobs if it will get people working and being productive!

We have many lower paying wear house jobs in the area but the tax revenue for the city and corresponding increased commerce benefits all!

 

[red4now]

Went to a New Holland dealer today and he told me not to buy a NH tractor but his other brand,a Kioti. How about that. He said he has sold only 10 NH brand tractors since 2009 cause of the LS switch. So I am now choosing to go with A JD 3720, MS 1643, Kioti DK40SE or Kubota 4400 HST. What do you guys think. I need something I will have for the next 20 years or so. Sorry Messick, I should not high jack your thread. Won't happen again.... sorry

Funny you should mention this - I was at a NH dealer this past week and they had a lot of orange on the lot?? I was there looking at flail mowers - not tractors since I had just come from my Kubota dealer down the street. After I got my flail mower info, I asked about the new lineup sitting outside - Kioti and he mentioned that the small NH tractors are being discontinued and that Kioti bought the NH factory and will be doing production there - saving the jobs that were going to be lost due to the shutdown apparently. Good news in this economy.

 

[ccsial]

He mentioned that the small NH tractors are being discontinued and that Kioti bought the NH factory and will be doing production there - saving the jobs that were going to be lost due to the shutdown apparently. Good news in this economy.

That is good news, so is the kubota plant. I hated to see the Ford brand go away. The old Shibaura tractors were great. My 1910 is over 30 years old and has had very few issues. I can't compain about my L3400 either, it's been great.

If Kioti is like Hyundai they may give Kubota and Deere a run for their money in the CUT area. I see an awful lot of Hyundai's on the road. The people I know that have them are quite happy too. I wonder if Kioti will come out with a long warranty period like Hyundai, or maybe they do already.

 

[houstonscott]

That is good news, so is the kubota plant. I hated to see the Ford brand go away. The old Shibaura tractors were great. My 1910 is over 30 years old and has had very few issues. I can't compain about my L3400 either, it's been great.

If Kioti is like Hyundai they may give Kubota and Deere a run for their money in the CUT area. I see an awful lot of Hyundai's on the road. The people I know that have them are quite happy too. I wonder if Kioti will come out with a long warranty period like Hyundai, or maybe they do already.

I think the new S. Korean tractor taking the market like Hyundai did with cars is LS not Kioti. They are giving Kubota a run for quality, fit, finish and price. They are what Kubota was in the 1970's. I hear people say you are paying extra for the orange paint. Funny how things change.

HS

HS

 

[TripleR]

Guys;

I'm no moderator but...

What happened to the OP title "new kubota factory"

Up North in Canada we welcome any jobs if it will get people working and being productive!

We have many lower paying wear house jobs in the area but the tax revenue for the city and corresponding increased commerce benefits all!

Same here, we would love to have jobs in my area; ANY new manufacturing plant would be welcome.

 

[Volfandt]

Good turn for the better

Kioti currently builds CUT's for Bobcat, wonder how their increased production here in N America will effect that deal?

 

[Tollster]

Good for Kubota and good for those folks down south, I am sure the wages are good for the area and the chances to grow with the company are excellent.
Work hard, stay clean, don't badmouth any workers or bosses, and put pride in your work, don't think about what they can do for you, but how you can help your company succeed and the rest will fall into place!

Merry Christmas to all those that landed a job there, I am happy for all of you!

 

[DK35vince]

Good for Kubota and good for those folks down south, I am sure the wages are good for the area and the chances to grow with the company are excellent.
Work hard, stay clean, don't badmouth any workers or bosses, and put pride in your work, don't think about what they can do for you, but how you can help your company succeed and the rest will fall into place!

Thats right. And thats the way it should be.
Wish someone would put a factory in our area.

 

[ericher69]

Amazing how quickly a thread cools down once the bad mouthing and negativity stops...

Merry Christmas to ALL!

 

[5030]

i didnt always work/live in idaho. I have friends that worked and currently work union jobs in Washington, firms like Boeing , and others that worked for GM. There all respectable hard working people, and i feel that saying all Union people are dope smoking lazy sacks isnt right.

I was Union electrician in Wash state, and we worked our butts off. It was our goal to work HARDER than the non union shops. Slackers were sent hiking.

I want to unionize potato pickers... so we can label all potatoes "Union Made"

hehe

Nature 'makes' potatoes not humans. I believe planted and harvested by union members would be appropriate.

They aren't all lazy and shiftless, I admit to that quite a few at least in auto plants are however.... My BIL is the second shift production manager at a large Ford facility not far from here and I know what goes on from a managers perspective because I hear about it. never been there (union plant). I worked and retired from a non union employer that kept the union out (in a heavily unionized area) by compensating his employees accordingly, however, there was no arbitration or union intervention when it came to employees that didn't follow the work rules set forth by them. There was the door.....

It amazes me (watching the Fiat grand Prix at lunchtime exiting from the Jeep plant and heading down Stickney at breakneck speed to get to the corner carryout to get some beer and then filling the parking lot, windows closed, smoking a joint and downing a brew). Great lunch. I'd never consider buying any Chrysler/Fiat product for that and other reasons. Watched the spectacle yesterday at noon.

 

[MessickFarmEqu]

Kioti and he mentioned that the small NH tractors are being discontinued and that Kioti bought the NH factory and will be doing production there - saving the jobs that were going to be lost due to the shutdown apparently. Good news in this economy.

Whoever told you that is confused. New Holland sold the tooling for the TZ subcompacts to Daedong. They are moving the line to Korea to their own factory. The factory was run buy Shibaru in Japan (not NH), don't be surprised when the other old Shibaru models creap into other brands.

Daedong has done this in the past, they bought Kubota's tooling from the 1970's L210 and used it to build one of the old LK series. I guess its cheaper for Daedong to buy another companies discarded tractor than it is to design their own from scratch.

 

[DK35vince]

Whoever told you that is confused. New Holland sold the tooling for the TZ subcompacts to Daedong. They are moving the line to Korea to their own factory. The factory was run buy Shibaru in Japan (not NH), don't be surprised when the other old Shibaru models creap into other brands.

Daedong has done this in the past, they bought Kubota's tooling from the 1970's L210 and used it to build one of the old LK series. I guess its cheaper for Daedong to buy another companies discarded tractor than it is to design their own from scratch.

Personally I think it makes sense, DaeDong buying the tooling for the TZ series subcompacts.
They take a machine that was field tested for several years. They know its strenghts and its weaknesses.
Retain its strenghts, repair/rebuild any weaknesses and you have yourself a solid, reliable subcompact tractor.

 

[art]

Other then the sheet metal style change, fasteners, dash boards, even colors they have copied to a "T" everything else in the past. Some have commented before about parts just bolting right on right down to Kubota engines bolting in!

When I worked in Korea 40 years ago I was always amazed at there ability to copy other products built. Did they use all the same building processes, no but I guess it's like looking at the outside of a watch.

 

[Oldpath05]

As I look trough this forum for engine oil cap. for L3400 Kubota, I see a lot of interesting topics, and couldn't pass this one up. For me that would be a job I'd love to have, and my job title would be (Tractor Tester Engineer), and my first day on the job, I'd go in the CEO's board meeting first thing, and say I've been testing the L3400 DT since 07, OK for the hay field, BUT, at hauling out firewood/logs, I'd tell them that we need some improvements on this model.
I know some people like HST, and for the hay field, it would probably work a lot better, but some like me, like a manual for some reason.

So let's start with L3400 DT, I want a better manual transmission, so that when I put it in gear, I don't have to first count to 10 sec. with the clutch down, and I want the reverse gear a little slower, not faster. I want at least 200lb. more loader lift, and 3 point hitch cap. I want bigger tires on front, and I want/demand a locking front diff. then before I have chance to get to all the (working in the woods accessory's) that I had to add on, at least a half dozen or more,
Donald Trump will say, YOUR FIRED!!!!!!!!!!!!!

 

[MessickFarmEqu]

I don't have to first count to 10 sec. with the clutch down, and I want the reverse gear a little slower, not faster. I want at least 200lb. more loader lift, and 3 point hitch cap. I want bigger tires on front, and I want/demand a locking front diff. then before I have chance to get to all the (working in the woods accessory's) that I had to add on, at least a half dozen or more,
Donald Trump will say, YOUR FIRED!!!!!!!!!!!!!

thats called feature creep. add all that, and you don't have a standard L any more or will have pushed into the price point of the next model up.

 

[JOHNTHOMAS]

thats called feature creep. add all that, and you don't have a standard L any more or will have pushed into the price point of the next model up.

Cars do it. Trucks do it. Even TVs and washing machines do it.
One person here complained that Kubota Ls don't have position control, mine did but mine wasn't the basic save the dollars model like his. Some people have complained because Kubota has so many models to choose from while others complain of a missing feature (you bought the wrong model).

 

[tjkubota93]

I read alot of posts about ford and Chrysler. I worked for both. I quit Chrysler because they sucked to work for. I got laid off from ford because the whole economy thing. Ford is a great company to work for and is managed well. I have alot of respect for ford, even though they sent me packing.
That doesn't affect what I buy though, I love me some chevys.