Plowing with a 2305

/ Plowing with a 2305 #1  

bigtiller

Super Member
Joined
Feb 1, 2006
Messages
7,351
Location
central Iowa
Tractor
John Deere 2720 John Deere 3039R John Deere Z545R
Here are some plowing pics. I bought a used 12 inch Brinly plow but it had a category 0 hitch. JD still has in stock the cat 1 mast to fit this plow but it was way too much money so I made my own to fit the I-match. This makes it easy on and off and just a few seconds to adjust the right lift arm and top link. I was plowing 6 to 8 inches deep in this garden in low gear at 2300 RPM and never had a problem. I never knew plowing was so much fun!
 

Attachments

  • PA260492 (Small).JPG
    PA260492 (Small).JPG
    75.1 KB · Views: 1,516
  • PA260493 (Small).JPG
    PA260493 (Small).JPG
    91 KB · Views: 1,377
  • PA260494 (Small).JPG
    PA260494 (Small).JPG
    93.2 KB · Views: 1,192
  • PA260495 (Small).JPG
    PA260495 (Small).JPG
    85.2 KB · Views: 1,001
  • PA260496 (Small).JPG
    PA260496 (Small).JPG
    99.5 KB · Views: 949
  • PA260497 (Small).JPG
    PA260497 (Small).JPG
    93.5 KB · Views: 836
  • PA260498 (Small).JPG
    PA260498 (Small).JPG
    88.7 KB · Views: 890
  • PA260499 (Small).JPG
    PA260499 (Small).JPG
    93.7 KB · Views: 918
  • PA260500 (Small).JPG
    PA260500 (Small).JPG
    90.8 KB · Views: 1,135
/ Plowing with a 2305 #2  
Nice pics! :) That doesn't look anything like our topsoil here in New England.
 
/ Plowing with a 2305 #4  
That's some really good lookin' dirt, and you're right plowing is fun, and a lot more soothing for the psyche than an $80 an hr. couch, the only problem I've found is, I always run out of plot before I get done plowing.:D
 

Attachments

  • Plown12 (Small).JPG
    Plown12 (Small).JPG
    87.9 KB · Views: 774
/ Plowing with a 2305 #5  
bigtiller said:
Here are some plowing pics. I bought a used 12 inch Brinly plow but it had a category 0 hitch. JD still has in stock the cat 1 mast to fit this plow but it was way too much money so I made my own to fit the I-match. This makes it easy on and off and just a few seconds to adjust the right lift arm and top link. I was plowing 6 to 8 inches deep in this garden in low gear at 2300 RPM and never had a problem. I never knew plowing was so much fun!
That is A good Looking plowing Job !
 
/ Plowing with a 2305 #6  
Bigtiller -

Great setup and great pictures. I'm happy to say that your ground looks very similar to mine here in MN. :)

Scott
 
/ Plowing with a 2305 #7  
You need some nice big rocks in that plot to really test your nerves.
 
/ Plowing with a 2305 #8  
Nice pic's and looks like fun! And WOW, how about that soil!!! If anyone needs SAND, I've got PLENTY of it here in Fla.....
 
/ Plowing with a 2305 #9  
I luuuuuuuv engaging the earth!!!!

GN
 
/ Plowing with a 2305 #10  
I am impressed ! I like the big smile on your face too ! Thanks for the pictures.
 
/ Plowing with a 2305 #11  
Nice job. I noticed it looked like the grass was dead where you were plowing, and the perimeter is green. Did you use roundup or something before you plowed?
 
/ Plowing with a 2305 #12  
I miss that good midwestern soil... The God-awful red clay in VA won't grow anything and will eat little plows like that. It would take me about three passes to get that deep...
 
/ Plowing with a 2305
  • Thread Starter
#14  
prosperity said:
Thanks for sharing the photos!

You've made me realize that I "need" a plow and disc now.



They are becoming hard to get. I debated too long before I decided to buy one. JD and Brinly have quit making the category 1 plow and I ended up driving 560 miles round trip to get mine. I probably could have found one closer had I waited but I wanted to go to a plowing event with some friends.


BTDT
The grass that looks dead is just garden weeds and quack grass that went dormant and was mowed before I plowed.
 
/ Plowing with a 2305 #15  
bigtiller said:
Here are some plowing pics. I bought a used 12 inch Brinly plow but it had a category 0 hitch. JD still has in stock the cat 1 mast to fit this plow but it was way too much money so I made my own to fit the I-match. This makes it easy on and off and just a few seconds to adjust the right lift arm and top link. I was plowing 6 to 8 inches deep in this garden in low gear at 2300 RPM and never had a problem. I never knew plowing was so much fun!

Great pics BT... yep, that's the good stuff we have here in Iowa. :)
 
/ Plowing with a 2305 #16  
I couldn't help but notice the rather content look on your face ! Not a bad looking finished product either. I'd guess that isn't the first time you've ever had ahold of a plow.
 

Marketplace Items

(1) 300 GALLON & (1) 330 GALLON POLY TOTES W/CAGES (A60432)
(1) 300 GALLON &...
(INOPERABLE) GEHL 8K TELEHANDLER (A58214)
(INOPERABLE) GEHL...
2012 NISSAN 110 FORKLIFT (A55745)
2012 NISSAN 110...
(APPROX. 20) 4' X 8' X 3/8" SHEETING (A52706)
(APPROX. 20) 4' X...
(2) NOS-8 LUG- 7000Ib 74SC-93 HUB FACE DROP AXLES (A60432)
(2) NOS-8 LUG-...
2021 CATERPILLAR 299D3 SKID STEER (A60429)
2021 CATERPILLAR...
 
Top