Power-trac Forum
- Thread starter BTI
- Start date
- Views: 7692
BKColeman
Gold Member
Glennmac Re: Power-trac Forum
<font color=blue>I didn't get the option (I unfortunately let them talk me out of it)</font color=blue>
I'm dissapointed. I thought you always got every option. What else did you not get on your EF?
--Brad
<font color=blue>I didn't get the option (I unfortunately let them talk me out of it)</font color=blue>
I'm dissapointed. I thought you always got every option. What else did you not get on your EF?
--Brad
Your new home, guys. /w3tcompact/icons/smile.gif
Carpenter
Silver Member
Muhammad, Thanks, but you had me worried for a minute. I went to the Other Brands section as usual and thought I was lost in a time warp. It took me a minute to realize what was going on; it is still morning here in the West. It also made me reflect on a sign I saw, that said: At our age,"Getting Lucky", means finding your car in the parking lot./w3tcompact/icons/hmm.gif
MossRoad
Super Moderator
- Joined
- Aug 31, 2001
- Messages
- 57,924
- Location
- South Bend, Indiana (near)
- Tractor
- Power Trac PT425 2001 Model Year
TBN is the best!
Thanks /w3tcompact/icons/smile.gif
Thanks /w3tcompact/icons/smile.gif
bubenberg
Platinum Member
- Joined
- Mar 21, 2002
- Messages
- 942
- Location
- Bucks County, PA
- Tractor
- PT425, Kubota L2050, 3 hydrostatic Exmark mowers. Z21D Kubota ZTR, 2 Kunz acrease wing mowers, 1 rough cut kunz mower, one vintage grasshopper ztr, one vintage gravely ztr, various large garden tracto
Glennmac Re: Power-trac Forum
glennmac, in rougher terrain we use the 48 inch rough cut mower and two 57 inch kunz mowers in tow. to have a nice cut you have to sharpen the blades as you would for a finish mower.
good luck
glennmac, in rougher terrain we use the 48 inch rough cut mower and two 57 inch kunz mowers in tow. to have a nice cut you have to sharpen the blades as you would for a finish mower.
good luck
ernemats
Veteran Member
- Joined
- Mar 29, 2002
- Messages
- 1,054
- Location
- Bolivar, pa.
- Tractor
- power trac 422, and agco-allis 5660, ,1845 power trac Greenworks CRT 426
Thanks , finally we have a home of our own.
MChalkley
Elite Member
- Joined
- Mar 27, 2000
- Messages
- 3,198
- Location
- Eastern Virginia
- Tractor
- EarthForce EF-5 mini-TLB (2001)
Glennmac Re: Power-trac Forum
Brad - <font color=blue>I'm dissapointed. I thought you always got every option. What else did you not get on your EF?</font color=blue>
I'm not sure if I'm supposed to post any EarthForce related messages here or not. The PT guys are pretty zealous, maybe even jealous, and never gave me permission... /w3tcompact/icons/laugh.gif
But, to answer your question, the only things I didn't get were 1) the afore-mentioned locking differentials, 2) a flashing beacon (which I'd already planned to supercede with the LEDs I installed 3) a tool kit, because no one could provide a list of the contents thereof.
Brad - <font color=blue>I'm dissapointed. I thought you always got every option. What else did you not get on your EF?</font color=blue>
I'm not sure if I'm supposed to post any EarthForce related messages here or not. The PT guys are pretty zealous, maybe even jealous, and never gave me permission... /w3tcompact/icons/laugh.gif
But, to answer your question, the only things I didn't get were 1) the afore-mentioned locking differentials, 2) a flashing beacon (which I'd already planned to supercede with the LEDs I installed 3) a tool kit, because no one could provide a list of the contents thereof.
MossRoad
Super Moderator
- Joined
- Aug 31, 2001
- Messages
- 57,924
- Location
- South Bend, Indiana (near)
- Tractor
- Power Trac PT425 2001 Model Year
Glennmac Re: Power-trac Forum
I thought you knew that family doesn't need to ask permission. /w3tcompact/icons/laugh.gif
I thought you knew that family doesn't need to ask permission. /w3tcompact/icons/laugh.gif
pajoube
Veteran Member
- Joined
- Oct 11, 2001
- Messages
- 2,225
- Location
- Montana (Near Bozeman)
- Tractor
- Former Owner PowerTrac 425 (September 2003)
Glennmac Re: Power-trac Forum
Mark,
You are a part of the articulated family.
PJ
Mark,
You are a part of the articulated family.
PJ
