SPYDERLK
Super Star Member
- Joined
- Feb 28, 2006
- Messages
- 10,354
- Location
- VA
- Tractor
- JD2010, Kubota3450,2550, Mahindra 7520 w FEL w Skid Steer QC w/Tilt Tatch, & BH, BX1500
Great Thread!
It seems to me that in order to control two cylinders thru valves that are either open or closed, as HSVs are, it would require a flow divider to prevent all flow going to the least resistance. Is this how it is done?
When you flip the rocker switch you go from controlling HSVs #1&2 to controlling solely #3, dont you?
My tractor came with 2 remotes with float included. Is there any reason they would have to be removed if I wanted to add further remote capability with HSVs.
Larry
It seems to me that in order to control two cylinders thru valves that are either open or closed, as HSVs are, it would require a flow divider to prevent all flow going to the least resistance. Is this how it is done?
When you flip the rocker switch you go from controlling HSVs #1&2 to controlling solely #3, dont you?
My tractor came with 2 remotes with float included. Is there any reason they would have to be removed if I wanted to add further remote capability with HSVs.
Larry