Suspension seat for JD 4110

   / Suspension seat for JD 4110 #31  
If you look at the link I posted earlier you can se the SE seat on my 2210 and you can also see the adjusment knob and weight indicator. Its a little taller than the standard X but Believe me It absorbs the bumps greatly. Its night and day difference.I have 2 ruptured discs in my back and can't have anything with out a suspension seat on it. I had to modify my Kubotas ZD 25 seat because its spring only and was to hard on my back.

Jim
 
   / Suspension seat for JD 4110 #32  
If you look at the link I posted earlier you can se the SE seat on my 2210 and you can also see the adjusment knob and weight indicator. Its a little taller than the standard X but Believe me It absorbs the bumps greatly. Its night and day difference.I have 2 ruptured discs in my back and can't have anything with out a suspension seat on it. I had to modify my Kubotas ZD 25 seat because its spring only and was to hard on my back.

Jim
 
   / Suspension seat for JD 4110 #33  
Here's a picture of the seat pivot pin on my 2210.
 

Attachments

  • 900449-Seat.jpg
    900449-Seat.jpg
    83.7 KB · Views: 196
   / Suspension seat for JD 4110 #34  
Here's a picture of the seat pivot pin on my 2210.
 
   / Suspension seat for JD 4110 #35  
Hey Ira have you looked at the Special edition X seat yet? Did you get how I think you can mount the seat with very little mods?


Jim
 
   / Suspension seat for JD 4110 #36  
Hey Ira have you looked at the Special edition X seat yet? Did you get how I think you can mount the seat with very little mods?


Jim
 
   / Suspension seat for JD 4110
  • Thread Starter
#37  
Jim,

I think I understand it a little better. I also got an exploded parts view of the seat from the dealer, which also helps. Problem is that if I buy it and can't get it to work, the dealer won't take it back. Guess I could always try to sell it on the board at a reduced price if that happens.

I will probably order it next week sometime.

Thanks,
Ira
 
   / Suspension seat for JD 4110
  • Thread Starter
#38  
Jim,

I think I understand it a little better. I also got an exploded parts view of the seat from the dealer, which also helps. Problem is that if I buy it and can't get it to work, the dealer won't take it back. Guess I could always try to sell it on the board at a reduced price if that happens.

I will probably order it next week sometime.

Thanks,
Ira
 
   / Suspension seat for JD 4110
  • Thread Starter
#39  
I ordered the seat after being reminded by the dealer that it cost $440 and cannot be returned. Hope it works. It will probably take two or three weeks for it to come in.

Ira
 
   / Suspension seat for JD 4110
  • Thread Starter
#40  
I ordered the seat after being reminded by the dealer that it cost $440 and cannot be returned. Hope it works. It will probably take two or three weeks for it to come in.

Ira
 

Tractor & Equipment Auctions

2023 NEW HOLLAND HYDRAULIC THUMB FOR B95D TLB WITH STANDARD STICK (A52748)
2023 NEW HOLLAND...
2017 INTERNATIONAL PRO STAR SERIES (A52472)
2017 INTERNATIONAL...
2014 FORD F-550 SUPER DUTY SERVICE TRUCK (A52472)
2014 FORD F-550...
2020 KUBOTA RTV X1100C UTV (A51406)
2020 KUBOTA RTV...
2015 ISUZU NPR 16FT BOX TRUCK (A52576)
2015 ISUZU NPR...
2013 CHEVROLET SILVERADO 1500 (A52472)
2013 CHEVROLET...
 
Top