GeneV
Elite Member
I'm sorry, I'm not swapping my tractor's fluids with some stranger's implements, you don't know where they've been! Personally, I practice safe tractoring.
Swapping attachments with hydraulic fluids? Any concerns?
- Thread starter dbchaplin03
- Start date
- Views: 17175
Xfaxman
Super Star Member
- Joined
- Feb 8, 2013
- Messages
- 13,279
- Location
- Guthrie, OK
- Tractor
- Toolcat 5610 G - Bobcat V417 - TORO+Loader
Last edited:
LouNY
Super Star Member
- Joined
- Jul 4, 2015
- Messages
- 13,996
- Location
- Greenwich, NY
- Tractor
- Branson 8050, IH 574, Oliver 1550 Diesel Utility (traded in on Branson) NH 8160. Kioti CK2620SECH
The caps or plugs are nice when they are clean, but after working they are usually filthy. Then my go to is pieces of paper towels stoved in the female connectors. When it's time to connect, pull out the paper towels and a quick rinse with WD or brake cleaner and then a shot to the male connectors and good swipe with a towel, ready to go.
I usually keep paper towels and WD in the cab.
Raul-02
Veteran Member
- Joined
- Aug 23, 2021
- Messages
- 1,467
- Tractor
- kioti DK4710 SE HST CAB
pretty small amount of fluid. I wouldn't be concerned just so long as you know the lines are not full of something awful like 20 year old rusty gunk.
Raul-02
Veteran Member
- Joined
- Aug 23, 2021
- Messages
- 1,467
- Tractor
- kioti DK4710 SE HST CAB
how do you keep the dirt out of the caps??
I have to clean my every time they pick up so much crud if I didn't clean 'em the caps would be the source of dirt in the system.
Xfaxman
Super Star Member
- Joined
- Feb 8, 2013
- Messages
- 13,279
- Location
- Guthrie, OK
- Tractor
- Toolcat 5610 G - Bobcat V417 - TORO+Loader
Push them together.
Raul-02
Veteran Member
- Joined
- Aug 23, 2021
- Messages
- 1,467
- Tractor
- kioti DK4710 SE HST CAB
DOH~!!!!
I didn't think of that. Now I feel stupid.
Xfaxman
Super Star Member
- Joined
- Feb 8, 2013
- Messages
- 13,279
- Location
- Guthrie, OK
- Tractor
- Toolcat 5610 G - Bobcat V417 - TORO+Loader
Don't feel stupid, you would have thought of it after using them awhile.
Xfaxman
Super Star Member
- Joined
- Feb 8, 2013
- Messages
- 13,279
- Location
- Guthrie, OK
- Tractor
- Toolcat 5610 G - Bobcat V417 - TORO+Loader
Took pictures of the flat face coupler caps on the V417:
They push together like this:
They push together like this:
AdmiralS
Bronze Member
- Joined
- Feb 4, 2021
- Messages
- 61
- Location
- Hudson Valley, NY
- Tractor
- Case 580K, New Holland LS180, Kubota LX3310HSDC, ToolCat UW53H (On Order)
This thread has been very helpful!
I am in the same boat now where I don't want the questionable New Holland fluid in my new Bobcat!
I bought 2 gallons of VG 46 yesterday and its as valuable as gold!
Question is -
Instead of wasting fluid, can i just use an air compressor (clean dried air) to purge the lines on the implements before hooking up to the new machine?
I am in the same boat now where I don't want the questionable New Holland fluid in my new Bobcat!
I bought 2 gallons of VG 46 yesterday and its as valuable as gold!
Question is -
Instead of wasting fluid, can i just use an air compressor (clean dried air) to purge the lines on the implements before hooking up to the new machine?
