Tatro / WR Long grapple combo install
- Thread starter MadReferee
- Start date
- Views: 11944
PineRidge
Super Member
PineRidge
Super Member
Like This?
3RRL
Super Member
- Joined
- Oct 20, 2005
- Messages
- 6,931
- Tractor
- 55HP 4WD KAMA 554 and 4 x 4 Jinma 284
PineRidge,
I really like yours being 48" wide. Using three teeth seems a pretty good idea. Is there any reason to make a cover plate to protect the hydraulic cylinder and lines like I've seen on some models?
Is there someplace that sells those curved arms (teeth)? Or do I have to get them made like you did? Maybe I'll bite the bullit and conventional cut them myself using x-y coordinates....old technology Ha ha.
I really like yours being 48" wide. Using three teeth seems a pretty good idea. Is there any reason to make a cover plate to protect the hydraulic cylinder and lines like I've seen on some models?
Is there someplace that sells those curved arms (teeth)? Or do I have to get them made like you did? Maybe I'll bite the bullit and conventional cut them myself using x-y coordinates....old technology Ha ha.
3RRL
Super Member
- Joined
- Oct 20, 2005
- Messages
- 6,931
- Tractor
- 55HP 4WD KAMA 554 and 4 x 4 Jinma 284
PineRidge,
I really like yours being 48" wide. Using three teeth seems a pretty good idea. Is there any reason to make a cover plate to protect the hydraulic cylinder and lines like I've seen on some models?
Is there someplace that sells those curved arms (teeth)? Or do I have to get them made like you did? Maybe I'll bite the bullit and conventional cut them myself using x-y coordinates....old technology Ha ha.
I really like yours being 48" wide. Using three teeth seems a pretty good idea. Is there any reason to make a cover plate to protect the hydraulic cylinder and lines like I've seen on some models?
Is there someplace that sells those curved arms (teeth)? Or do I have to get them made like you did? Maybe I'll bite the bullit and conventional cut them myself using x-y coordinates....old technology Ha ha.
tlbuser
Veteran Member
</font><font color="blue" class="small">(
Or do I have to get them made like you did? Maybe I'll bite the bullit and conventional cut them myself using x-y coordinates....old technology Ha ha. )</font>
I've used this place ACS Steel for a couple of projects and everything they've done for us turned out exactly as ordered with a reasonably quick turn-around time. I just sent them my autocad files.
Or do I have to get them made like you did? Maybe I'll bite the bullit and conventional cut them myself using x-y coordinates....old technology Ha ha. )</font>
I've used this place ACS Steel for a couple of projects and everything they've done for us turned out exactly as ordered with a reasonably quick turn-around time. I just sent them my autocad files.
tlbuser
Veteran Member
</font><font color="blue" class="small">(
Or do I have to get them made like you did? Maybe I'll bite the bullit and conventional cut them myself using x-y coordinates....old technology Ha ha. )</font>
I've used this place ACS Steel for a couple of projects and everything they've done for us turned out exactly as ordered with a reasonably quick turn-around time. I just sent them my autocad files.
Or do I have to get them made like you did? Maybe I'll bite the bullit and conventional cut them myself using x-y coordinates....old technology Ha ha. )</font>
I've used this place ACS Steel for a couple of projects and everything they've done for us turned out exactly as ordered with a reasonably quick turn-around time. I just sent them my autocad files.
kennyd
Advertiser
</font><font color="blue" class="small">( Any reason not to go full length?
)</font>
Besides the twisting issue already mentioned, weight could also be a concern, as the heavier it is, the less weight you could pick up overall. It would also make removal more dificult.
Just my opinion...
)</font>
Besides the twisting issue already mentioned, weight could also be a concern, as the heavier it is, the less weight you could pick up overall. It would also make removal more dificult.
Just my opinion...
kennyd
Advertiser
</font><font color="blue" class="small">( Any reason not to go full length?
)</font>
Besides the twisting issue already mentioned, weight could also be a concern, as the heavier it is, the less weight you could pick up overall. It would also make removal more dificult.
Just my opinion...
)</font>
Besides the twisting issue already mentioned, weight could also be a concern, as the heavier it is, the less weight you could pick up overall. It would also make removal more dificult.
Just my opinion...
jinman
Rest in Peace
- Joined
- Feb 23, 2001
- Messages
- 20,387
- Location
- Texas - Wise County - Sunset
- Tractor
- NHTC45D, NH LB75B, Ford Jubilee
</font><font color="blue" class="small">( What is the opinion on these grapples that are much narrower than the bucket? )</font>
I like the small grapple with my rock bucket. I can pull the pins and snatch the jaws and cylinder off because they just weigh around 50 lb. Also, I have yet to find anything I can't clamp down on enough to lift with my narrow jaw including rocks that were so big my loader would hardly lift them. I didn't want to do a lot of welding, so buying the grapple as-is was ideal for me. For someone else, they may completely different needs and abilities. You just have to suit your own situation and use. /forums/images/graemlins/smile.gif
I like the small grapple with my rock bucket. I can pull the pins and snatch the jaws and cylinder off because they just weigh around 50 lb. Also, I have yet to find anything I can't clamp down on enough to lift with my narrow jaw including rocks that were so big my loader would hardly lift them. I didn't want to do a lot of welding, so buying the grapple as-is was ideal for me. For someone else, they may completely different needs and abilities. You just have to suit your own situation and use. /forums/images/graemlins/smile.gif
