Tatro / WR Long grapple combo install

   / Tatro / WR Long grapple combo install #51  
So how would one of the bucket grapples work picking up dead medium cedar trees?
 
   / Tatro / WR Long grapple combo install #52  
Like This?
 

Attachments

  • 886334-tree2.jpg
    886334-tree2.jpg
    65.2 KB · Views: 341
   / Tatro / WR Long grapple combo install #54  
PineRidge,
I really like yours being 48" wide. Using three teeth seems a pretty good idea. Is there any reason to make a cover plate to protect the hydraulic cylinder and lines like I've seen on some models?

Is there someplace that sells those curved arms (teeth)? Or do I have to get them made like you did? Maybe I'll bite the bullit and conventional cut them myself using x-y coordinates....old technology Ha ha.
 
   / Tatro / WR Long grapple combo install #55  
PineRidge,
I really like yours being 48" wide. Using three teeth seems a pretty good idea. Is there any reason to make a cover plate to protect the hydraulic cylinder and lines like I've seen on some models?

Is there someplace that sells those curved arms (teeth)? Or do I have to get them made like you did? Maybe I'll bite the bullit and conventional cut them myself using x-y coordinates....old technology Ha ha.
 
   / Tatro / WR Long grapple combo install #56  
</font><font color="blue" class="small">(
Or do I have to get them made like you did? Maybe I'll bite the bullit and conventional cut them myself using x-y coordinates....old technology Ha ha. )</font>

I've used this place ACS Steel for a couple of projects and everything they've done for us turned out exactly as ordered with a reasonably quick turn-around time. I just sent them my autocad files.
 
   / Tatro / WR Long grapple combo install #57  
</font><font color="blue" class="small">(
Or do I have to get them made like you did? Maybe I'll bite the bullit and conventional cut them myself using x-y coordinates....old technology Ha ha. )</font>

I've used this place ACS Steel for a couple of projects and everything they've done for us turned out exactly as ordered with a reasonably quick turn-around time. I just sent them my autocad files.
 
   / Tatro / WR Long grapple combo install #58  
</font><font color="blue" class="small">( Any reason not to go full length?

)</font>

Besides the twisting issue already mentioned, weight could also be a concern, as the heavier it is, the less weight you could pick up overall. It would also make removal more dificult.

Just my opinion...
 
   / Tatro / WR Long grapple combo install #59  
</font><font color="blue" class="small">( Any reason not to go full length?

)</font>

Besides the twisting issue already mentioned, weight could also be a concern, as the heavier it is, the less weight you could pick up overall. It would also make removal more dificult.

Just my opinion...
 
   / Tatro / WR Long grapple combo install #60  
</font><font color="blue" class="small">( What is the opinion on these grapples that are much narrower than the bucket? )</font>

I like the small grapple with my rock bucket. I can pull the pins and snatch the jaws and cylinder off because they just weigh around 50 lb. Also, I have yet to find anything I can't clamp down on enough to lift with my narrow jaw including rocks that were so big my loader would hardly lift them. I didn't want to do a lot of welding, so buying the grapple as-is was ideal for me. For someone else, they may completely different needs and abilities. You just have to suit your own situation and use. /forums/images/graemlins/smile.gif
 

Tractor & Equipment Auctions

2017 UTILITY VS2RA 53FT REEFER TRAILER (A51222)
2017 UTILITY VS2RA...
2006 GMC C7500 DUMP TRUCK (A51406)
2006 GMC C7500...
KLEEMAN MS192 MOBILE SCREEN (A51242)
KLEEMAN MS192...
New Swict 66" Skidloader Bucket (A50774)
New Swict 66"...
2015 JEEP PATRIOT (A51406)
2015 JEEP PATRIOT...
2020 MACK PINNACLE (INOPERABLE) (A50854)
2020 MACK PINNACLE...
 
Top