Never thought about that before but I checked out several models of greys and several of US and your thoughts seem to be correct. "As usual"
Buying Advice Thinking about Yanmar 2210 but need some help
- Thread starter Florida_Farmer
- Start date
- Views: 5624
-
- Tags
- yanmar 2210
Never thought about that before but I checked out several models of greys and several of US and your thoughts seem to be correct. "As usual"
clemsonfor
Super Member
As others have said, yes that's a drawbar. And yes it's round. Look up on Hoye. It's the same on my ym2000
CoyPatton
Veteran Member
- Joined
- Aug 10, 2015
- Messages
- 1,546
- Location
- Poplar Bluff, MO
- Tractor
- Yanmar YM2002D with Koyker 110 FEL
Like Winston had, I have a YM2002D. It has those exact same brackets under it with a round drawbar with a double hitch plate at the end.
California
Super Star Member
- Joined
- Jan 22, 2004
- Messages
- 14,804
- Location
- An hour north of San Francisco
- Tractor
- Yanmar YM240 Yanmar YM186D
Photo: YM240's green rectangular drawbar (at far right) in rectangular bracket.
There are two loader-reinforcement bars, not original, that come back from the loader structure and are welded to the drawbar bracket.
Another YM240 drawbar bracket photo. From Craiglist, somebody else's tractor.
====
YM186D drawbar bracket.
There are two loader-reinforcement bars, not original, that come back from the loader structure and are welded to the drawbar bracket.
Another YM240 drawbar bracket photo. From Craiglist, somebody else's tractor.
====
YM186D drawbar bracket.
Last edited:
OP
Florida_Farmer
Bronze Member
- Joined
- Jun 30, 2002
- Messages
- 74
- Location
- Central Florida
- Tractor
- 841 Powermaster, TC33D, TC40 DA, Yanmar 1500, Yanmar 2210B, Scag Turf Tiger, Exmark 72" Lazer Z
That is exactly what shows in the 1500 parts manual. :thumbsup:
bmaverick
Super Member
- Joined
- Sep 17, 2013
- Messages
- 5,588
- Location
- Beloit-WI
- Tractor
- Yanmar YM2610 ■YANMAR GURU■ EXTRAORDINAIRE
My YM2610 from Fredricks didn't come with a drawbar. So, I popped the one off of my trade-in JD850 that is very rectangular and hard edged. Then weeks later, a neighbor from a good distance down the road actually had a YM gray drawbar, but no longer had the tractor. So, I now have both styles. The JD is really firm between the arms. It weights a bit more too, almost another 10-lbs. The flat area with the holes is also wider. A JD850 is a twin to the YM2500, green vs. red paint. The YM2500 is gear and the YM2610 is the Power-Shift version. Thus, all 3 machines are extremely closely matched as siblings.
I can snap a pix sometime with the 2 side-by-side to post here. Both fit the tractor.
