Traction Traction tips ?

   / Traction tips ?
  • Thread Starter
#31  
joe 48 , thats what I am looking for.... I would much rather buy some than make a half -a$s set myself.
Know anywhere eles that carries them , I will check out JC Whittny and see if they still sell them. thanks .
 
   / Traction tips ? #34  
I realy like the self tapping screw idea, seems easy, no damage done if you take them out, would not think pre-drill would be necessary?

Would think you pull them out and no worse for wear?
 
   / Traction tips ? #35  
First thing that I'd be wondering is the type of tires you have and what load you are carring as far as ballast.

Then I'd check the air pressure!

Then I'd want to know what type of surface you are cleaning, gravel or black-top.

Some slippage isn't bad, actually it's recommended. If you can't move, that's naturally to much!
 

Tractor & Equipment Auctions

2013 Chevrolet Malibu Sedan (A51694)
2013 Chevrolet...
UNUSED 10PCS Industrial Polyester Lifting Straps (A53117)
UNUSED 10PCS...
2007 Kenworth Tandem Axle Road Tractor (A47477)
2007 Kenworth...
2012 SOUTHERN 130BBL VACUUM TRAILER (A53843)
2012 SOUTHERN...
UNUSED RAYTREE RMDB82 - 82" HYD EZ DIGGER BACKHOE (A52706)
UNUSED RAYTREE...
UNUSED Black Outdoor Patio Fabric Screen (A53117)
UNUSED Black...
 
Top