Traction Traction tips ?

   / Traction tips ?
  • Thread Starter
#31  
joe 48 , thats what I am looking for.... I would much rather buy some than make a half -a$s set myself.
Know anywhere eles that carries them , I will check out JC Whittny and see if they still sell them. thanks .
 
   / Traction tips ? #34  
I realy like the self tapping screw idea, seems easy, no damage done if you take them out, would not think pre-drill would be necessary?

Would think you pull them out and no worse for wear?
 
   / Traction tips ? #35  
First thing that I'd be wondering is the type of tires you have and what load you are carring as far as ballast.

Then I'd check the air pressure!

Then I'd want to know what type of surface you are cleaning, gravel or black-top.

Some slippage isn't bad, actually it's recommended. If you can't move, that's naturally to much!
 

Tractor & Equipment Auctions

PTO Pump (A50860)
PTO Pump (A50860)
UNUSED Mobile Expandable Metal Barricade Set (A50860)
UNUSED Mobile...
2016 Volvo A25G 20CuYd Articulated Dump Truck (A49346)
2016 Volvo A25G...
2003 Chevrolet Silverado 2500 Pickup Truck (A48081)
2003 Chevrolet...
2021 Jeep Grand Cherokee Limited SUV (A48082)
2021 Jeep Grand...
1978 ASPT 30ft Pole S/A Towable Trailer (A48081)
1978 ASPT 30ft...
 
Top