Traction Traction tips ?

   / Traction tips ?
  • Thread Starter
#31  
joe 48 , thats what I am looking for.... I would much rather buy some than make a half -a$s set myself.
Know anywhere eles that carries them , I will check out JC Whittny and see if they still sell them. thanks .
 
   / Traction tips ? #34  
I realy like the self tapping screw idea, seems easy, no damage done if you take them out, would not think pre-drill would be necessary?

Would think you pull them out and no worse for wear?
 
   / Traction tips ? #35  
First thing that I'd be wondering is the type of tires you have and what load you are carring as far as ballast.

Then I'd check the air pressure!

Then I'd want to know what type of surface you are cleaning, gravel or black-top.

Some slippage isn't bad, actually it's recommended. If you can't move, that's naturally to much!
 

Tractor & Equipment Auctions

1979 MACK R MODEL (A53843)
1979 MACK R MODEL...
2015 Ford Transit Cargo Van (A54814)
2015 Ford Transit...
1996 JLG Commander CM2033 20ft Electric Scissor Lift (A54811)
1996 JLG Commander...
2018 MACK CHU613 DAYCAB (INOPERABLE) (A53843)
2018 MACK CHU613...
2015 Ford F-550 Ext. Cab Enclosed Service Truck with Liftgate (A53422)
2015 Ford F-550...
2011 Ford F-150 4x4 Ext. Cab Pickup Truck (A50323)
2011 Ford F-150...
 
Top