Traction Traction tips ?

   / Traction tips ?
  • Thread Starter
#31  
joe 48 , thats what I am looking for.... I would much rather buy some than make a half -a$s set myself.
Know anywhere eles that carries them , I will check out JC Whittny and see if they still sell them. thanks .
 
   / Traction tips ? #34  
I realy like the self tapping screw idea, seems easy, no damage done if you take them out, would not think pre-drill would be necessary?

Would think you pull them out and no worse for wear?
 
   / Traction tips ? #35  
First thing that I'd be wondering is the type of tires you have and what load you are carring as far as ballast.

Then I'd check the air pressure!

Then I'd want to know what type of surface you are cleaning, gravel or black-top.

Some slippage isn't bad, actually it's recommended. If you can't move, that's naturally to much!
 

Tractor & Equipment Auctions

2007 Honda CR-V SUV (A53424)
2007 Honda CR-V...
2012 FREIGHTLINER CORONADO 122 (A55745)
2012 FREIGHTLINER...
Toro 880 Procore (A55758)
Toro 880 Procore...
2002 Blue Bird F131612 Bus (A51692)
2002 Blue Bird...
2013 XLR THUNDERBOLT 35X14 5TH WHEEL CAMPER (A52472)
2013 XLR...
RIGID TOOLBOX (A52472)
RIGID TOOLBOX (A52472)
 
Top