TSC paint sucks

[daugen]

here it is at Amazon.com

Valspar (5339-27-6PK) New Kubota Orange Tractor and Implement Spray Paint - 12 oz., (Pack of 6) : Amazon.com : Automotive

that's a good deal, five and half bucks a can delivered. If it's "the good stuff" still, it's a very good deal.

 

[k0ua]

that's a good deal, five and half bucks a can delivered. If it's "the good stuff" still, it's a very good deal.

I actually think the Van Sickle color match is a hair better than the Valspar, but it is hard to find, I cannot find any internet outlet. It is sold thru Race Brothers and Orscheln farm store dealers. the Valspar is good paint though. Keep in mind I am matching my Kioti not a Kubota, and the Van Sickle is a perfect match for the Kioti.

 

[mikehaugen]

After hearing other reviews similar to this, I am glad my local farm store (farm & fleet) still carries the valspar.

At work we use a lot of sherwin williams industrial enamel and it seems pretty good too.

 

[Midniteoyl]

Regardless of brand, I always do the light tack coat then 2 med coats, 10-15 mins apart. We use Sherman Williams enamel paint on the 3-phase converters and it will do the same..

 

[Midniteoyl]

Van Sickle is available at my local Smith Farms, which is an Ace store.. You can try there.

 

[94BULLITT]

I am was thinking about getting a can of the Majic paint but with all the complaints I won't.

I got some Valspar Cub Cadet yellow in a spray can. That stuff was awful, it would not cover.

I guess I will be sticking with the genuine Kubota paint.

 

[bubbacuse77]

I will offer this review. I just used a can of the new magic paint and was impressed vs the valspar. Good coverage and was thick without runs. I really like the nozzle. IMO valspar nozzles need work. I can't tell you how many nozzles I have had plug up or rupture leaving a mess of the job and in my hand. Just my 2 cents

 

[mikehaugen]

I was just at the local store today and noticed that the valspar "farm and implement" paint has been cut back and is being filled in with valspar "industrial armor" paint. I liked the "farm and implement" paint and "restoration" paint because it came in OEM colors. Does anyone know if this is the same paint, just in different colors, or is it different paint... better/worse?

 

[LD1]

I can't comment too much on the rattle cans, cause I rarely use them, and its only for touch-up when I do.

Yellow of any brand don't cover well unless primed with either grey or yellow primer. I have painted a lot of yellow things with lots of yellow brands.

 

[94BULLITT]

I used gray primer under the Cub Cadet yellow.

Sent from my GT-P3113 using TractorByNet