TYM 233 rear axle seal replacement

[sarakodi]

I have a TYM 233 approximately 15 years old
Both rear axle seals are leaking and I thought I would replace them myself along with the barring's. I attempted to remove one side and cant seem to pop it out.
Has anyone ever attempted this on a TYM tractor if it's in fact the same instructions?

Thanks in advance

 

[ptsg]

You'll need to remove the entire axle housing #1. It might be tricky because there are a couple of close fit alignment pins, along with RTV that tends to glue things together.

Keep in mind all the brake parts. I don't know if those stay in the tractor or come with the housing.

Then, should be a matter of taking the snap ring #15 out and slide the shaft out, so you can finally get to the seal.