Upgraded to an MX5200

   / Upgraded to an MX5200
  • Thread Starter
#21  
Thanks for the information and links. I'll have to trace back how/where they wired to figure out if I need another line or not from the sounds of it. That fuse box is nice. May have to pick one of those up for the RTV if and when I ever get around to the lighting project on that.
 
   / Upgraded to an MX5200 #22  
Johnny.
The factory wiring harness to the tractor rear has a power lead dedicated for rear work lights, there is a lead on both right and left under the fender at end of harness. I have a factory worklight on one side and I used the opposite lead for LED lighting. There is no separate switch as work light has integral surface switch. Circuit is ignition key activated.
 
   / Upgraded to an MX5200 #23  
We have a MX5800 and really like it. It's our fourth tractor (MF 240, Kubota M5700, Kubota L3800 and now the MX). Our last two have had the HST and it really makes a difference in convenience.

Good luck with your projects. Based on your initial post, it is clear that you will enjoy using your new toys.
 
   / Upgraded to an MX5200 #24  
Funny, I don't see pictures of your new tractor. ;)
 
   / Upgraded to an MX5200
  • Thread Starter
#25  
Not the best picture but the only one I have :)

mx5200.jpg
 
   / Upgraded to an MX5200 #26  
Congrats! I have about 500 trouble free hrs on my MX and absolutely love it.
 

Tractor & Equipment Auctions

2019 International 4300 2000 Gal Water Truck (A45336)
2019 International...
2013 Ford F-150 Ext. Cab Pickup Truck (A46684)
2013 Ford F-150...
PICK UP INSTRUCTIONS (A42021)
PICK UP...
Amkus Rescue System (A46683)
Amkus Rescue...
2024 Apex Hyperdisc T26 High Speed Tiller (A48561)
2024 Apex...
2018 Generac MLT6SM-STD3 6kW Towable Light Tower (A45336)
2018 Generac...
 
Top