Upgraded to an MX5200

   / Upgraded to an MX5200
  • Thread Starter
#21  
Thanks for the information and links. I'll have to trace back how/where they wired to figure out if I need another line or not from the sounds of it. That fuse box is nice. May have to pick one of those up for the RTV if and when I ever get around to the lighting project on that.
 
   / Upgraded to an MX5200 #22  
Johnny.
The factory wiring harness to the tractor rear has a power lead dedicated for rear work lights, there is a lead on both right and left under the fender at end of harness. I have a factory worklight on one side and I used the opposite lead for LED lighting. There is no separate switch as work light has integral surface switch. Circuit is ignition key activated.
 
   / Upgraded to an MX5200 #23  
We have a MX5800 and really like it. It's our fourth tractor (MF 240, Kubota M5700, Kubota L3800 and now the MX). Our last two have had the HST and it really makes a difference in convenience.

Good luck with your projects. Based on your initial post, it is clear that you will enjoy using your new toys.
 
   / Upgraded to an MX5200 #24  
Funny, I don't see pictures of your new tractor. ;)
 
   / Upgraded to an MX5200
  • Thread Starter
#25  
Not the best picture but the only one I have :)

mx5200.jpg
 
   / Upgraded to an MX5200 #26  
Congrats! I have about 500 trouble free hrs on my MX and absolutely love it.
 

Tractor & Equipment Auctions

2019 Harley-Davidson FLHTP Police Electra Glide Motorcycle (A46684)
2019...
2007 FORD F550  SERVICE TRUCK (A45676)
2007 FORD F550...
2013 BMW X3 xDrive28i AWD SUV (A46684)
2013 BMW X3...
2023 HELI CPYD25C FORKLIFT (A47001)
2023 HELI CPYD25C...
2020 Sundowner 22' Aluminum Hours Trailer with Living Quarters (A45336)
2020 Sundowner 22'...
New Wolverine Skid Steer Pallet Forks Hydraulic Adjustable (A48289)
New Wolverine Skid...
 
Top