Upgraded to an MX5200

JohnnyMX · Mar 22, 2018

Thanks for the information and links. I'll have to trace back how/where they wired to figure out if I need another line or not from the sounds of it. That fuse box is nice. May have to pick one of those up for the RTV if and when I ever get around to the lighting project on that.

majorwager · Mar 22, 2018

Johnny.
The factory wiring harness to the tractor rear has a power lead dedicated for rear work lights, there is a lead on both right and left under the fender at end of harness. I have a factory worklight on one side and I used the opposite lead for LED lighting. There is no separate switch as work light has integral surface switch. Circuit is ignition key activated.

rbtjr · Mar 22, 2018

We have a MX5800 and really like it. It's our fourth tractor (MF 240, Kubota M5700, Kubota L3800 and now the MX). Our last two have had the HST and it really makes a difference in convenience.

Good luck with your projects. Based on your initial post, it is clear that you will enjoy using your new toys.