What is the proper way to install a 3 pt rear blade

[94BULLITT]

Here is the plow with hydraulics all the way down
View attachment 296785

Pic with hydraulics about 4 " up plow is just touching ground.

View attachment 296786
I can see if I lengthen the top link it will sit more level

That is about how I plow with mine, maybe a hair shorter on the toplink. It is going to vary by how hard the ground is frozen as to how short you can run it. I have the same blade, it is made by Woods. It just takes practice.

 

[94BULLITT]

I saw you have a rear remote a hydraulic toplink is very handy. You can make adjustments on the fly if it is cutting in to much or not enough.

 

[rasorbackq]

Seems his blade back bone was very level when he plowed in the video

 

[rasorbackq]

That is about how I plow with mine, maybe a hair shorter on the toplink. It is going to vary by how hard the ground is frozen as to how short you can run it. I have the same blade, it is made by Woods. It just takes practice.

Not sure if its a Woods blade but was purchased from JD before me.

 

[94BULLITT]

Not sure if its a Woods blade but was purchased from JD before me.