Wheel spacers

[halfBaked2024]

And the relationship to the wheel spacers is? Posted in the wrong thread by chance?

Good catch - I’m doing the side view first, then I’ll spin it around to do the (pertinent) drawing on this thread. I started here to see how much crap I have to move in the shop to accommodate the length of the tractor.

 

[halfBaked2024]

Found it without too much difficulty...some pictures are included in this thread. Hopefully the link works.

I have a second (gasp!) confession to make!

Hi, I tipped my tractor on it's side... I though I would share this in hopes that it might help someone be more aware of how unexpected things can happen! Well, it happened last summer. After over ten years operating my B2910 (Close to 1,000 hours on the tractor), while using the box blade...

www.tractorbynet.com

I hadn’t even thought of creating my own hazard, thank you so much for this! This will help me stop before a grading project and plan out where the safest place for the spoil pile is… I guess it’s not always what’s most expeditious!

 

[halfBaked2024]

Dealer just sent prepped pics with the Bro-tek 3” spacers. Sittin’ pretty and coming home to me next week!

 

[bigtiller]

With repetition we need to be wary of complacency.

 

[halfBaked2024]

With repetition we need to be wary of complacency.

Succinctly put. I’m going to steal that from you. Heck, I might even print it out and tape it to the dash.

 

[oosik]

My Kubota has ag rims and R-1 tires. The front tires are set at the neutral setting. The rear tires are set at the widest setting and are filled with 1550 pounds of RimGuard.

Even with all this - there are a few slopes on my property where I will not go horizontal.