Close enough
Ex wife from near Dubuque, me out in the country N of Rockford IL.Thanks for the pics. So now days by the 4th of July the corn is 6 feet tall?
Building a Shop
- Thread starter Huskerplowboy
- Start date
- Views: 41150
Close enough
Ex wife from near Dubuque, me out in the country N of Rockford IL.Thanks for the pics. So now days by the 4th of July the corn is 6 feet tall?
OP
Huskerplowboy
Silver Member
That field's a good 5 feet or better for sure. We've had a week of high 80's and high humidity, perfect weather for corn, not so perfect for a fat guy like me!
mjncad
Super Member
Pretty cool. Did that cost extra, or was that the foundation guy's everyday forms?
mjncad
Super Member
Great idea!
wedge40
Veteran Member
- Joined
- Oct 8, 2007
- Messages
- 2,196
Could someone please provide some more detail on how this laser level and 2by works.. I'm a visual kind of guy so drawings will help, or a long detailed explanation. I'm asking becasue I will be leveling some ground soon, hopefully in the next week or two. I have an excavator coming Thursday, so over the 4th I'll get to dig up and move some stumps around.
Wedge
Wedge
OP
Huskerplowboy
Silver Member
Wedge40: I'll throw something together this evening. I might have a photo or may be out playing in the dirt after work and can take one quick.
The board on the box blade is just there to get the laser detector high enough to match the height of the tripod the laser level is on. I keep intending to bring out some square tubing or something better, but it's worked so far. If I was going to do this a lot, I'd weld or bolt a steel tube to the box blade more permanently.
In my case, I had a corner of the pad that was about the height I wanted it all to, so I parked the tractor there, set the blade down on the ground. Then I set up the rotary laser somewhere outside the area I'm working in and leveled it out. I then adjusted the clamp-on laser detector up and down on the board until it read the laser line as being dead-on the center of the detector's range. Then, any time the detector beeps solid (on-mark), I know my blade is at the same elevation as it was in that corner. The dewalt detector I have beeps fast if it's detecting the laser but is too high, and beeps slowly when it's seeing the laser but is too low, so I can hear which way I need to move the 3-point to get back to the solid beep (or as close as I can get) If you didn't already have a spot that was at the desired height, you could measure and adjust that way. Say the laser was 40" above the desired grade level. You could park the tractor anywhere and lower the blade to the ground, then measure up 40" off the ground and clamp the detector on at that point. Then as you cut down, eventually the detector will get low enough to see the laser and will beep to let you know you're close.
The board on the box blade is just there to get the laser detector high enough to match the height of the tripod the laser level is on. I keep intending to bring out some square tubing or something better, but it's worked so far. If I was going to do this a lot, I'd weld or bolt a steel tube to the box blade more permanently.
In my case, I had a corner of the pad that was about the height I wanted it all to, so I parked the tractor there, set the blade down on the ground. Then I set up the rotary laser somewhere outside the area I'm working in and leveled it out. I then adjusted the clamp-on laser detector up and down on the board until it read the laser line as being dead-on the center of the detector's range. Then, any time the detector beeps solid (on-mark), I know my blade is at the same elevation as it was in that corner. The dewalt detector I have beeps fast if it's detecting the laser but is too high, and beeps slowly when it's seeing the laser but is too low, so I can hear which way I need to move the 3-point to get back to the solid beep (or as close as I can get) If you didn't already have a spot that was at the desired height, you could measure and adjust that way. Say the laser was 40" above the desired grade level. You could park the tractor anywhere and lower the blade to the ground, then measure up 40" off the ground and clamp the detector on at that point. Then as you cut down, eventually the detector will get low enough to see the laser and will beep to let you know you're close.
wedge40
Veteran Member
- Joined
- Oct 8, 2007
- Messages
- 2,196
Very good description.. I understand now.. I was thinking of only a laser transmitter and not a transimitter/receiver combo. Makes sense now.
Thank for providing the extra detail.
Which DeWalt are you using?
Wedge
Thank for providing the extra detail.
Which DeWalt are you using?
Wedge
Last edited:
OP
Huskerplowboy
Silver Member
I picked up a Dewalt DW073KD from Amazon back in May. Uses cordless tool batteries from 9.6 to 18 volts. Came with the detector and a big ol' case. Not sure it's 100% accurate, but I figure for this kind of work, it's pretty close. I've been meaning to do some tests to see how accurate it is, but haven't had time.
Flatheadyoungin
Veteran Member
i've been looking at those and had a similar idea....i just wasn't sure about how to hear the beeping......good idea!!
do you wish you had went with the auto-leveling model? just curious as i watch the used market for one.....
...never thought about mounting one on a BB just always had it in my head using a dozer.....
be sure to keep us posted......i'm thinking of starting on mine next year...
do you wish you had went with the auto-leveling model? just curious as i watch the used market for one.....
...never thought about mounting one on a BB just always had it in my head using a dozer.....
be sure to keep us posted......i'm thinking of starting on mine next year...
OP
Huskerplowboy
Silver Member
So far, I haven't seen the need for the auto-leveling with what I've been doing. I could see if you were going to do projects where you'd be moving the level around and setting it up a lot, that the autolevel would be handy (like if you used it to shoot lines for drop ceiling tracks over a large area or something). I usually turn on the bump sensor and so far have never had it get off level. Get a good contractor style tripod and it'll stay set pretty well. For the occasional job or something like this where you'll set it once and then drive around for an hour or so, the manual level works fine IMHO.
