New 5075M is at the dealer's!

[Zebrafive]

$391 is a great price for the 3 function multicoupler upgrade :thumbsup:
Wish I could have done it for that price! (ON my 640 loader after the fact)

My guess is it also includes the boom 1 function multicoupler and you will have to buy part key 10 for your grapple.

Let us know what you find out.

Build your own will not work for me on JD's website. So I've can't try and build an H series loader. I'll bet they dropped the electric/hydraulic global disconnect system due to lack of sales, or it has not been engineered for this loader yet.

 

[vtsnowedin]

$391 is a great price for the 3 function multicoupler upgrade :thumbsup:
Wish I could have done it for that price! (ON my 640 loader after the fact)

My guess is it also includes the boom 1 function multicoupler and you will have to buy part key 10 for your grapple.

Let us know what you find out.

Build your own will not work for me on JD's website. So I've can't try and build an H series loader. I'll bet they dropped the electric/hydraulic global disconnect system due to lack of sales, or it has not been engineered for this loader yet.

Gotah ask? Why doesn't build your own work for you? Did you use it soo much that you wore out your welcome? Or did you get blacklisted by saying non PC sales positive things?

 

[AKfish]

Ok, so the H260 loader I have had on order since January, has always included the following option:

Code 4556 - 3 Function Single Point Hydraulic Connection (Tractor Half and Loader Half)

The cost of this option is $391.00 WHEN ORDERED WITH THE LOADER. This is the larger single point connector that mounts on the side of the loader frame with a large handle that sticks out.

What I have been discussing with my dealer over the last few days, is the single point hydraulic connection that mount near the carrier for the oil lines that goes to my grapple.

Here's what it looks like from the parts catalog:

The 4 main pieces are listed below.

AW35189 Quick-Connect Coupler $388.49
W55095 Bracker $ 23.64
AW35185 Oil Line $ 31.10
AW35186 Oil Line $ 31.80

So a total of just over $ 475.03 for the pieces that goes on the loader frame.

Then there is the piece that goes with the grapple, shown as item 10 in the following diagram:

Details for item 10 as follows:

AW33653 Quick-Connect Coupler $325.51

So all together, it comes to just over $800 for the single-point quick connect to a hydraulic implement connected to the loader frame carrier.

My dealer is still checking to see if there is a way to order those parts with the loader instead of the standard couplers and bracket that comes standard with the 3 function loader frame.

Whoa... that seems kinda goofy?!? I've got the single point QC at the loader boom - but, $800 for just that part of the system - doesn't make sense to me.

So, yeah I'm still confused...

AKfish

 

[pclausen]

My hope is that Zebra is right and the single point QC at the boom is part of the 4556 option code for $391.

Dealer did talk to the factory they say my 5085M shows going into assembly this week! :thumbsup: They didn't have an answer about the single point for the grapple, but they are supposed to get back to him tomorrow. My grapple showed up today, so I'll likely pick it up over the next few days.

 

[Edward. S]

My hope is that Zebra is right and the single point QC at the boom is part of the 4556 option code for $391.

Dealer did talk to the factory they say my 5085M shows going into assembly this week! :thumbsup: They didn't have an answer about the single point for the grapple, but they are supposed to get back to him tomorrow. My grapple showed up today, so I'll likely pick it up over the next few days.

My 6430 Premiums going to be at the dealer hopefully tomorrow! It landed on Sunday the 22nd at the port of Tacoma, WA. I was told that is on a truck right now. I won't be sleeping tonight. :drool: I will remember, "Pictures or it didn't happen"

 

[Zebrafive]

Gotah ask? Why doesn't build your own work for you? Did you use it soo much that you wore out your welcome? Or did you get blacklisted by saying non PC sales positive things?

I probably built so many things and never requested a quote they shut me down?

Seriously, it worked fine back in 2010 when I was looking at 5xxxM series tractors and 563/673 loaders. Now when I click on build your own the little "hand" becomes "broken" :confused2: I think they changed their website, or it could be I change computers going from Windows XP to Windows 7.

I have no problem with JDparts.com :thumbsup:

 

[Zebrafive]

Whoa... that seems kinda goofy?!? I've got the single point QC at the loader boom - but, $800 for just that part of the system - doesn't make sense to me.

So, yeah I'm still confused...

AKfish

AK, did you get the implement half of the single point QC to go with the the half on your loader boom (included with the loader)? On did you have to buy it separate?

 

[AKfish]

My 6430 Premiums going to be at the dealer hopefully tomorrow! It landed on Sunday the 22nd at the port of Tacoma, WA. I was told that is on a truck right now. I won't be sleeping tonight. :drool: I will remember, "Pictures or it didn't happen"

Fantastic! :thumbsup: Really lookin' forward to seein' a 2012 Premium machine!

AKfish

 

[AKfish]

AK, did you get the implement half of the single point QC to go with the the half on your loader boom (included with the loader)? On did you have to buy it separate?

It was all part of the option package with the loader hydraulics. I could go back and look at the order form - but, I didn't have to buy anything "separate".

I wanted the 3rd SCV function and the single point quick connect at the loader mount as well as the bucket end for my grapple. What I did have to buy separate was the flat-face SS quick disconnects and plumb then into the single point connector. Something like $200 for those.

AKfish

 

[Edward. S]

Fantastic! :thumbsup: Really lookin' forward to seein' a 2012 Premium machine!

AKfish

I've seen many Premium machines, but I can't wait to see mine! My friend ordered one the exact spec as mine. I forgot to order stabilizer bars with mine and his. :confused2: Wooopsy Daisy! I can get the dealer to put those on. Its 2:53AM I told you I wouldn't be sleeping! :laughing: