Home-made attachments...

   / Home-made attachments... #91  
this is what I've worked at for over 30 years
 
   / Home-made attachments... #92  
Very good work and very inventive. I trust that by you're saying "im not an engineer" you just mean that you don't have a school degree. Remember - not all engineers have a piece of paper declaring them engineers and not all of the engineers that have that piece of paper can actually engineer anything.

This is very true.
 
   / Home-made attachments... #93  
Here are a couple of things I either built from scratch or converted it into something I needed .


land plane 1.JPG land plane 2.JPG

Land plane / road grader I built a couple of years ago . Added some additional bracing , modified the blade adjustment since these pictures were taken , but still no paint .



leaf bucket 1.JPG leaf bucket 2.JPG

Leaf bucket I built a few years ago when the wooden one I had fell apart while dumping on the burn pile , thus it all burned !! :)


ripper 1.JPG ripper 2.JPG


A 8 shank ripper that I made from a old single gang disk frame . What started out life as a 2 gang pull disk was converted to a single gang 3 point disk , then everything that was from the axle mounts on ward was cut off , braced , and the 4" x 4" x .25" tubing with shanks was added . Can pull it side hill or downhill with my TC30 , but uphill get's a little iffy when I try to go to maximum depth .


Fred H.
 
   / Home-made attachments... #94  
Welcome to the TBN!

..and I love yourscreen name! I've been accused of being unstable more than once...

?..and no offense, but whatever you say, you sure engineered the cr*p out of that attachment and the fence you made with it.

Awesome job, but nothing I think I'd ever be able to replicate, much less use.

Again, nice work, and welcome!

Thomas

hello,live in n.ireland,I've made several things that might be of interest to u ,not copies, just my own ideas, the 1 i have posted is a couple of attachments for a mini digger to leave it a bit handier to erect a fence on ur own im not an engineer and just made this in my spare time if u like it ill show more fotos of it and different stuff
 
   / Home-made attachments... #96  
Those are so solidly made!

T

Here are a couple of things I either built from scratch or converted it into something I needed .


View attachment 357039 View attachment 357040

Land plane / road grader I built a couple of years ago . Added some additional bracing , modified the blade adjustment since these pictures were taken , but still no paint .



View attachment 357041 View attachment 357042

Leaf bucket I built a few years ago when the wooden one I had fell apart while dumping on the burn pile , thus it all burned !! :)


View attachment 357043 View attachment 357044


A 8 shank ripper that I made from a old single gang disk frame . What started out life as a 2 gang pull disk was converted to a single gang 3 point disk , then everything that was from the axle mounts on ward was cut off , braced , and the 4" x 4" x .25" tubing with shanks was added . Can pull it side hill or downhill with my TC30 , but uphill get's a little iffy when I try to go to maximum depth .


Fred H.
 
   / Home-made attachments... #97  
hello,live in n.ireland,I've made several things that might be of interest to u ,not copies, just my own ideas, the 1 i have posted is a couple of attachments for a mini digger to leave it a bit handier to erect a fence on ur own im not an engineer and just made this in my spare time if u like it ill show more fotos of it and different stuff

Wow that looks like my Shaver post driver look like a joke! Great build and nice fence!
 
   / Home-made attachments... #98  
Hear is the forks I put together last month. I was fortunate to have found the actual forks in my local salvage yard. The rest is 3/8"x 4" flat stock. It makes handling logs easy.
 

Attachments

  • 100_3160.JPG
    100_3160.JPG
    809.7 KB · Views: 472
  • 100_3154.JPG
    100_3154.JPG
    764.1 KB · Views: 360
  • 100_3152.jpg
    100_3152.jpg
    484.9 KB · Views: 353
  • 100_3151.jpg
    100_3151.jpg
    429.1 KB · Views: 322
   / Home-made attachments... #99  
I'd never be lucky enough to find forks in a salvage yard. Nice Find!!!! :D
 
   / Home-made attachments... #100  
great find on the forks and mount. looks like it should be on there.
 
 

Tractor & Equipment Auctions

2020 KENWORTH T680 TANDEM AXLE SLEEPER (A51219)
2020 KENWORTH T680...
100GAL L SHAPED FUEL TANK (A50854)
100GAL L SHAPED...
2022 Ram Bighorn 2500 4X4 (A51039)
2022 Ram Bighorn...
Ih 490 Disk (A50514)
Ih 490 Disk (A50514)
PORTER CABLE 150 PSI AIR COMPRESSOR (A50854)
PORTER CABLE 150...
2017 Ford F-550 Ext. Cab Valve Maintenance Truck (A50323)
2017 Ford F-550...
 
Top