Welding Table Build

   / Welding Table Build
  • Thread Starter
#12  
Looks really good , Richard. I have a 4' X 4' table I built several years ago and put square tube on two sides for a vice and also a bench grinder, I really like the fact that I can quickly remove the vise or grinder out of the way. I didn't put any type of solid feet on mine just have large casters with the poly coating on them. I run across this pic the other day and may add something like this to mine.

My bench grinder is on a stand made from a truck wheel and a large pipe for the vertical. That's a good idea having yours in a receiver.

I saw that caster lift design too. I'll move this table a lot. If it becomes too much of a hassle I'll tip it upside down and cut it apart and redesign. When it's parked over by the drill press where it'll mostly live I'll leave it sitting on the casters. Will only use the feet if I'm doing heavy work on it so I don't have to chase it.
 
   / Welding Table Build
  • Thread Starter
#13  
   / Welding Table Build #14  
Very nice Richard, I am sure you will get a lot of use out of that one.:thumbsup:
 
   / Welding Table Build #17  
Especially for a stupid blade operator huh George!!! :)

Hah. I sure wish I was as stupid as you and could weld haha. Not that I'd have any projects but sure is nice to have those talents
 
   / Welding Table Build #18  
Nice job, got me thinken I should put the cutting table on the other end. Here is how I do my fold down vise. The bolt going all the way through rides in a slot and that is the stop when it comes out and is the pivot, for folding it down. When it hangs down it sits under the over hang.
View attachment vise.pdf
View attachment vise fold.pdf
thanks for posting
 
   / Welding Table Build #19  
Nice table and nice shop too. I also like the drop wheels on the one with the bottle jack. So many innovative folks on here.
 
   / Welding Table Build #20  
Steal all you can use. That's why I post here. :)

I think we are both in that boat!

Really nice table... great work, turned out nicely. Thanks for sharing!

I want better pictures of the superduty... bet it's a lariat trim, '99-'04, likely an '03-'04 with a 6.0 diesel? Stick or auto?
 

Tractor & Equipment Auctions

2008 Thomas Freightliner 71 Capacity School Bus #29 (A46502)
2008 Thomas...
2013 GMC Terrain SUV (A46684)
2013 GMC Terrain...
Frontier WR4109 (A47307)
Frontier WR4109...
Kivel 3500 Lb Pallet Forks (A47307)
Kivel 3500 Lb...
38x18 Open Rim (A49339)
38x18 Open Rim...
John Deere 7130 (A47307)
John Deere 7130...
 
Top