What have you done with/to your GC Series 2300, 2400, 1700 Tractor TODAY

[GeneV]

I leveled and seeded that area where I tore out all the brush and buckthorns. I'm getting pretty good with the ratchet rake, it really is great for leveling and prepping for seed, just a bit of a learning curve to use it effectively.

 

[Imold]

County line Brand from TSC. They have a sale right now to get the PHD for $529. I went through the reviews and people with JD 1025R's, Kubota BX's and, even a guy with a GC1705 had much praise for the unit so I figured I'd give it a whirl. I'd have loved a EA Subcompact post hole digger but for the little work I'll be doing I just couldn't justify the extra money. I believe they are rebranded Tarter units.

Like to know how it works out for you.

 

[WranglerX]

Drug a old log splitter off my trailer with my GC 1715... Bought a sad 20 ton log splitter that seems to be pretty much intact other then two dead tires and little B&S motor missing carburetor/fuel tank/air cleaner... Yes it's a project...

Dale

 

[cglaser104]

Drug a old log splitter off my trailer with my GC 1715... Bought a sad 20 ton log splitter that seems to be pretty much intact other then two dead tires and little B&S motor missing carburetor/fuel tank/air cleaner... Yes it's a project...

Dale

Nice! I hope you get the ol' girl working!

 

[MoMower]

Like to know how it works out for you.

I run one on my 1723e, works well.

 

[cglaser104]

I run one on my 1723e, works well.

Do you have any interference issues with the toplink? That's the only thing I've ever been super worried about

 

[MoMower]

Do you have any interference issues with the toplink? That's the only thing I've ever been super worried about

It “bottoms out” when raised all the way. I try not to raise it all the way up fast, so as not to stress the toplink bracket.

I buried the auger for the first time a few weeks ago, PIA. Normally I don’t let it go more then 3” or so before picking it up to clean it out

 

[manganos]

My new neighbors moved in a few weeks ago and I told them I’d clear their back yard for them. He was surprised what I could do with the 1723eb . Now the wife is on me to clear mine up

And my backyard

 

[cglaser104]

My new neighbors moved in a few weeks ago and I told them I’d clear their back yard for them. He was surprised what I could do with the 1723eb . Now the wife is on me to clear mine up View attachment 663687View attachment 663688View attachment 663689

And my backyard

View attachment 663690

Looks good! Nice work!

 

[GeneV]

My new neighbors moved in a few weeks ago and I told them I’d clear their back yard for them. He was surprised what I could do with the 1723eb . Now the wife is on me to clear mine up View attachment 663687View attachment 663688View attachment 663689

And my backyard

View attachment 663690

Scenic hood out there by you.

 

[cglaser104]

Received my post hole digger today. It seems pretty well built but there some immediate concerns for my GC and likely for any sub compact. The top link attach point is waaaay too tall and looks mildly different from the pictures I was able to see online before purchasing. This is more a warning to anyone else that would consider this as an option. I'll get it all tuned up with my plasma cutter and welder for my purposes. Couldn't beat the price as they were on sale so all's well.

 

[cdaigle430]

The county line I bought two years back worked very well. Its a little different from yours, mine doesnt have the handle assist and stand but it woks very well on my GC2410. I just need to buy the 12 inch auger next-the 6 inch woks well but sometimes not wide enough.

I did not have the top link issue you have.

 

[MF RED in MT]

Received my post hole digger today. It seems pretty well built but there some immediate concerns for my GC and likely for any sub compact. The top link attach point is waaaay too tall and looks mildly different from the pictures I was able to see online before purchasing. This is more a warning to anyone else that would consider this as an option. I'll get it all tuned up with my plasma cutter and welder for my purposes. Couldn't beat the price as they were on sale so all's well.View attachment 663931View attachment 663932View attachment 663933View attachment 663934

Nice, what diameter auger did you choose.

KC

 

[cglaser104]

Nice, what diameter auger did you choose.

KC

Didn't pick one up yet. There was a sale at to get the PHD for 529.99 so I jumped at it. Augers are readily available here at a variety of farm stores when I need them. Future plans are pole barn that I'll build and adding a mix of privacy and chain link fence on my property.

 

[kenmbz]

Clean up on aisle 5, another ash goes boom.

 

[GeneV]

Even viewed sideways, them GC's sure are cool-looking tractors. I dunno about you guys, but I just think they look so much better than kubotas.

 

[aamyotte]

Even viewed sideways, them GC's sure are cool-looking tractors. I dunno about you guys, but I just think they look so much better than kubotas.

They certainly do. Especially when clean, that red is beautiful.

 

[MF RED in MT]

Just received my MF "Parts Catalogs" for my tractor implements.

F.Y.I., Below is a copy of each cover page of the 5 parts catalogs I purchased from AGCO, and the publication numbers:

KC

DL100 LOADER #651873M3; CBO5 BACKHOE #651874M5; QUICK HITCH #4263571M2; 2360 SNOWBLOWER #4316031M1; 2340 DOZER BLADE #4316210M1

View attachment DL100 Loader Parts Catalog.pdf; View attachment CB05 Backhoe Parts Catalog.pdf; View attachment Quick Hitch Parts Catalog.pdf; View attachment 2360 Snowblower Parts Catalog.pdf; View attachment 2340 Dozer Blade Parts Catalog.pdf

Updated 7/30/2020: These Parts Books can be viewed for free at the AGCO Parts Books .com , below is what I used to search for these parts books:

DL100 is used for the DL100 Loader;

CB05 is used for the CB05 Backhoe;

Quick Hitch is used for the Quick Hitch;

2360 is used for the 2360 Snowblower;

2340 is used for the 2340 Dozer Blade.

 

[kenmbz]

Just received my MF "Parts Catalogs" for my tractor implements.

F.Y.I., Below is a copy of each cover page of the 5 parts catalogs I purchased from AGCO, and the publication numbers:

KC

DL100 LOADER #651873M3; CBO5 BACKHOE #651874M5; QUICK HITCH #4263571M2; 2360 SNOWBLOWER #4316031M1; 2340 DOZER BLADE #4316210M1

Thank you for putting these up for us!

 

[MF RED in MT]

Just received my MF "Parts Catalogs" for my tractor implements.

F.Y.I., Below is a copy of each cover page of the 5 parts catalogs I purchased from AGCO, and the publication numbers:

KC

DL100 LOADER #651873M3; CBO5 BACKHOE #651874M5; QUICK HITCH #4263571M2; 2360 SNOWBLOWER #4316031M1; 2340 DOZER BLADE #4316210M1

Thank you for putting these up for us!

Your welcome, here are the AGCO pricing, and they also have E Books just a little less $ for those that like that (I'm old and old school - paper books):

KC