Search results

It 216MB. Laid out similar by chapter to the XR41 manual. I honestly haven't had to much time to look through it yet but pictures and diagrams are about the same in quantity and quality.

This is what it looks like.

I use imidacloprid insecticide placed at the roots that the tree sucks up and lasts about a year. I'll treat in September or October and the trees are protected come spring. I haven't had a problem in years after I switched but maybe I wasn't using the right spray.

I know my dealership told me that to view the manuals they have to login to the LS site so they monitor or can monitor what dealers do. If that's true, maybe that's why you are seeing this being stopped. Don't know. John Deere, Massey Ferguson, CNH, Kubota, Yanmar, and probably others I'm...

What time of day did you order it? If it was after hours you might have had to wait for someone to process the order.

Bootlegged? Good God man. Nobody is scanning anything.

Try Messick's. It much easier.

Parts manual is sort old hat. It's only good for the day it was printed. Part numbers get superceded often. Just go online and view your XR parts whenever you need a part.

Yes. No they won't provide one.

The PDF seems pretty comprehensive at first glance. It shows as the LS manual so I think I'm good but again I only skimmed it as I don't have time to review 700+ pages. The PDF is searchable. Great find.

Will do. I ordered the downloadable PDF so I'm just waiting for the download link to show up in my email.

I used to spray for pine weevil but it never worked for me. I treat the roots every fall and that has worked out for me. Those weevils can take two years of growth in 3 months. I like that sprayer.

Good find. For $50 I ordered one and hope that it's comprehensive. We'll see what it's like. CNH is another source for service manuals but only for models that LS makes for CNH.

Here's a downloadable chart . https://www.discounthydraulichose.com/quick-disconnects.html

The rear remotes are ISO 5675, 1/2 inch. They are the female poppet type on the tractor. Pretty standard and you can pick them up at most farm stores.

Gotta like that.... spring has sprung.

Here is a picture of my factory top link. You'll notice the holes are different sizes. The smaller hole is 3/4" pin (Cat 1) and mounts to the tractor. The larger hole is 1" pin (Cat 2) and mounts to the implement. If you tried to reverse the top link the Cat 2 side will not fit in the tractor...

No I'm not saying that so sorry if that's the way it came across. It should fit a Cat 2 quick hitch because you have Cat 2 links on the implement/quick hitch side. The difference between a Cat 1 and 2 quick hitch is about 5 inches wider and taller and your linkage can spread to accommodate that.

I'd have to compare to see what you are seeing. What is the pin size of your top link on the tractor side?

Yeah I know they state Cat 2 in the brochure but Cat 1 and 2 have different spacing between the lower arms and between the lower arms and top link. These arms are Cat 1 spaced. Lastly the the tractor is Cat 1 on the tractor side and uses Cat 2 end link balls on the implement side making it a...

Gotcha. That's not the typical way to measure the length of top link that you would need. Hope it works out for you.

No speedometer on the Boomer. There are differences some small, some more convenient, and some larger. Paint Loader and subframe Wheels Yellow zinc fasteners Hood release is on the left side of hood Front work lights are angled Mid pto standard Draft control optional Greater parts network and...

Yes

Tractor is approximately 4200+1100 for the loader and no idea on the backhoe. The weights should be listed in each of the owners manuals you have.

I'll be curious if that ends up working out for you. I'm thinking it might be too long and you won't be able to tilt the implement up. Saying that it's longer than stock, how did you measure the length you needed?

Never seen a dealer order cat 2 on anything smaller than the top model. It wasn't a selling point for me because it is not a true cat 2 hitch. I ended up ordering the cat 1 extendable links and made it a true cat 1 again.

Blue Mule's are non adjustable end links. But I agree that the European style lower links and matching top link is something that the US should have adopted years ago.

I know when I looked at the factory hydraulic filters on my 2018 Boomer 40, XR3140, they were Donaldson filters. So the factory filters were good filters but I'm not sure what they use today. Might try getting the paint off and see which brand theses are. Factory oils have very good spec's so...

No but you can hold it up to your ear and listen to the tone. I used one of these last year to find my break. https://www.amazon.com/dp/B0086GE2C2?ref=ppx_pop_mob_ap_share

Fence post for Babe the Blue Ox?

S51-F03 - ACV driver short circuit to battery

I agree. I cannot find anything that says either are bad tractors. Deere and Kubota have just been in the market longer and have a reputation. Both of these Korean manufacturer's are still developing theirs.

Good points. I seem to remember GM at one point was paying more for retired workers than current wages. That was UAW that drove that ship to ground.

What 3rd function did you get?

This thread is almost unusable. So many posts and different models all in one makes it very difficult. This should be a sticky by model/series so someone can locate their model and get the numbers they are looking for.

Installed a Grammer MSG95 seat that I had. It's a direct bolt on so no modifying needed. Just a power lead for air compressor which I took from the auxiliary plug on the right hand console.

Changed out the loader level indicator.

Wondering if it's because I'm uploading via Tapatalk? It was there earlier. I'll try it again.

My MT3 57 was delivered yesterday. Haven't had time to really look it over but seems pretty nice. As I get more time I'll be able to give some more feedback.

Yes I'm familiar with those kits. I'm attaching a picture of how the LS one would look.

Any idea why a steering valve would be noisy, like a hydrostatic whine? Seems to whine more so above 2000 rpm and you only have to move the wheel a little either way and it will whine. No loader or other load on the front end and it does it stationary or moving. Being that this valve is in...

Could someone please take some pictures of the piping for the quick disconnects that comes off the loader valve? And how/where the bracket mounts to the engine? Looking to see if I can convert my Boomer 40 to the XR configuration and I'd like to see how it is configured and if it's possible.

Ever consider what the best upgrade to your tractor could be? Do you do a lot of loader work? Or 3pt work? Maybe run equipment off the rear hydraulic outlets? Well quite possibly your answer would be faster hydraulics. Deplorable Diesel, Deplorable Diesel | Deplorable Diesel, has the pump...

Here are a couple pictures.

7:55 starts this review by tractor time with Tim and Kennyd from Bolt on Hooks. It isn't much but I had to laugh at Kenny when he said there was no where to rest your arm when operating the loader joystick. The armrest being adjusted would have helped. I certainly do not hit the draft/3pt...

Did a few mods over Christmas and New Year vacation. Grooved my tires, air ride seat, speaker upgrade, and a tool box.

Just an opinion with no solid data to support it so here is my opinion. The 270TL appears to be for older model CNH compacts that may have used different mounts so it may or may not fit. The mounts on the loader appear to be different. I'd definitely want to try it before hand. The picture...

I finally got a chance to mow and try out the new HDTH7 Bush Hog. I also had a OBD Link that I used for something else so I setup the dashboard to read parameters of the Boomer.

Here is how I did mine.

Is this what you are looking for?

23 inches outside to outside.

Would you give me the data label off your a/c compressor. Looking for manufacturer and model number.

I purchased the deck lock-up kit with the tractor and yesterday I went out to check the tractor, i.e. clean the deck, grease, visual inspection. Well I looked and was wondering why the deck seemed to be crooked. Almost 1 inch on the deck height gauge. Looking at things everything is in-place...

I was looking for something to do this weekend so I installed a temp gauge. Everything was really easy to hook up. My only mistake was I scratched the black plastic right below the gauge but I am sure the tractor will survive. Easier to read then the light and easier to tell when the front...

Anyone ever have theirs quit? Started mine tonight and no tach.

I have a couple questions, First overnight the deck will lower the 3pt is that a normal function for the 2520? Seems if I open the rate of drop valve the faster it will bleed down when the tractor is off and if I slow the rate of drop the less it bleeds down. Second question, is on the rate...

Besides the seat, I found two mods to do today. I relocated the "thermos" which might look like it is in the way for seeing implements behind you but it does not affect my visibility. Now to figure out what I want to use it for as I keep the manuals in the shop, not the tractor. Next I...

Well I finally got to play a little bit with the new tractor. I used the 73" bucket to haul some rocks I was pulling out of the yard and these rocks turned out to be boulders. Most were 2 feet in diameter and since this is an old farm field I take it no one ever picked rock. Anyway I was able...

How are your power steering hoses routed? Mine go under the loader frame mount and when I turn sharp to the left the front tire is contacting the hoses and I would be afraid that if I was in reverse the tire might grab it and break it off. Looking to see how your is routed and/or how yours is...

The new 2520 showed up this morning. Installed the accessories from the 2320 (seat, tool box, lights) and had to move the rear wheels out as they were rubbing the mower lift arms. Don't know why the left them in the narrow position. It has a total of 1 hour on the clock and needs to be broken...

Well I ordered my 2520, 200cx and 72" mmm 3 weeks ago and the mower deck just showed up after 3 weeks. Now I guess I will have to wait another 3-5 days because now I have to "fall in line" to get the tractor prepped, loader installed and mmm installed. So by the time it is finally delivered it...

What are the opinions on the 72"MMM verses the 62D on the 2520?

Guys, I got my turbo and I am in the process of getting the adapters made and assembling oil lines. I'll take some pictures as I get started and post them. My question is does anyone see a problem with returning the turbo oil return line to the valve cover. The turbo will sit high enough for...

Would anyone happen to know what the manufacturers part number is on the 2320 implement pump? All I know it is a Kanzaki/Yanmar pump and dealer doesn't know. Was hoping one of you might have had yours off and knew what it was.

I am purchasing a new snowblower for the winter and the sales man said that in October Deere will announce a new 50+" snowblower for the 2000 series. But product is not supposed to be available until fall of 2009. He said that he thinks it is going to be the same size as the 3000 series uses...

Had this laying around and figured it would make a good toolbox for the JD. Now I just need to p/u some JD green paint.

An update on my seat experiment, I purchased two seat suspension springs from JD (M153100 for and X series standard suspension) that were roughly the same base diameter as the rubber under the seat. I pulled the rubber and put in the springs and used a fender washer and small bolt at the bottom...

I found a dealer that has a 2005 3320 with 15hrs on it for $15555. One owner, an older farmer that used it to run wagons to the field and traded it for a 5xxx. With 3320, 72"mmm, 300cx, and 59" fr snow blower and my trade it would cost me $16195. Let me hear some feedback guys....

What are the diferences between the 2320's 62D1 and the 25/2720 62D2 MMM deck? I was looking at trading up tractor to tractor but I was told the decks are different and would not interchange.

I was at the dealer today buying seat springs to replace the rubber on mine and I picked up a dealer printed doc on the 2720 and this is what they list as the distinctions between it and the 2520: "31hp 100+ cu in. engine that is esentially the same engine block as the 3320. 12v dc outlet...

Does anyone know if the new 72" mmm will fit the 2320? Deere doesn't list it as an option but the extra width would be nice for my application.

Does adding liquid ballast to your tires improve your ride or make it rougher?

Has anyone come up with a better idea for the skid shoes for their 54" front blade? Mine bend and one even broke off the blade itself. They are adjusted to where the blade is level and about a 1/4" off the ground and they still catch. Any solutions?

I have read on here the differences between the 2320 and 2520 hydraulics in that the 2520 has two pumps and the 2320 has only one. Where are you getting this information? The 2320 gets power steering from the same place the 2520 does which is tied into the hydro cooler line and both have...