Search results

I destroyed the sidewall last summer. Something punctured a big hole in one this afternoon. This is two that’s failed. Almost $300 a pop ain’t cheap. I limbed the ZD1511 a 1/4 mile back to the shop & pulled out the ZD1611 to continue to mow until dark. These mowers are super...

What current model # is the biggest Horsepower farm tractor that Kubota makes with hydrostatic trans option ? I’d love to have a new M5-111 open station Farm Tractor with a E-Hydro Trans Option. I use to have a JD 4720 66hp OS with Hydro trans & I fluid filled all 4 tires but it still wasn’t...

What Brand Rock Bucket is this ? I’d like to have an 84” to fit my JD global carrier

Does the buttons on single shifter knob change your 1234 gears ? OR does that still give you the hi/lo option to have 32spds like my current trans ? What is the turtle / rabbit on the loader joystick ?

I’ve had this tractor for 3yrs & never noticed any regen lights coming on but it uses a good bit of DEF so I know it’s regen as needed . Have you guys seen this “A” exh temp light on before & revving engine up to 1200rpm ? Mine did the other day for 30mins

I’ve tried to buy one of these heat shields from JD & parts guys can’t find it listed so I’m getting my machine shop buddy to make me one for my other 5115M that doesn’t have this option. I took my old one off to go by.

I thought someone may have spent the $$ for a set of the latest greatest fad TWEELS 🤠 Mike text or call six78 98six 322six

Anybody looking for a MX10 in the SouthEast ? It’s listed over in the marketplace. North Georgia Cutter is SOLD

I bought this 3pt hitch lift type MX10 cutter brand new. Used very little. Low hours. Approximately 2200lbs going off memory ? Works great. Always kept inside out of sun & weather. I went up to batwing & zero mower. $8900 pick up in North Georgia No trades Call Mike six78 98six...

Will both machines come out of 4wd ? Both are basically same HP I think. I think I’ve got one of my ZD1511 sold & wanting a 4wd for steep banks. I don’t necessarily like the front deck running on the ground because I have rough farm Ground. Regens are no issue as I mow 3-6hrs at a...

Does anybody know how much a complete set of 19.5-24 & 12.5/80-18 New R4 tires & wheels would cost from JD ?

I borrowed this pic from internet. These looks homemade ? I can slide my seat all the way forward & hang my boots out over front axle & it makes a Huge Difference climbing my steep banks here on the farm.

I mow a very steep bank Horizontally on my farm. I’ve rolled one tire off the rim 3 separate times in the last two summers . Very scary ride until I get stopped. I know Kubota has a monopoly on these. Has anyone found anything with a 6or8ply sidewall ? The cheesy 4ply blew the...

Has anybody had one leaking ? My 2018 5115M open station water pump is leaking at just over 500hrs & im wondering how bad of a job it’s going to be.

I sold my ZD1211 great machine btw but lacked power on my steep hills. I bought Two ZD1511-72 & absolutely love them but I need more power & an 84 inch single deck for my Hilly 18acre application. My farm ground is too rough for FD models tiny deck wheels running on the ground. i like the...

I’ve got weld on chain hooks on backs of all my JD global buckets. I didn’t want to weld hooks on my grapple bucket incase I ever installed a grapple later on down the road. So I cut one ear off 3/8 chain Clevis hooks welded them to 3pt hitch swivel balls with 1” bore & bolted them to the...

Anybody have any knowledge of these ? The new prince type pump runs my poultry caking machine way faster at the same PTO rpm. Like TOO FAST. I’m sure I’ll have to run it at a slower rpm. Both are rated at 2300psi 540 PTO rpm. Borrowed InnerWeb pix

My 2020 5115M open station has a factory horn. My 2018 has the switch & wiring harness under the hood but no horn. I installed a factory horn & plugged it up but it doesn’t work. I haven’t checked wiring for power yet. My owners manual on both tractors doesn’t list a horn fuse.

Same tractor as 5083E 5093E 5325 5425 5525. headlamps will work. ran fine when parked 2 days ago. will not boost off with jumper cables. No crank. No spin over. i hadn’t checked fuses or battery voltage yet. I’ve read & been told the intake heating element will blow a fuses & do...

This tractor & my other one both would take forward or reverse gear only using Power Reverser Lever & no clutch as long as I was sitting in seat. Now the 2020 year model quit taking gear & flashes “N” whichever way your attempting to go. I can go back to neutral on PR switch, depress clutch...

Does a LA1154 (M7060) & LA1854 (M5-x1) loader fit the same tractor mounts ? I’m sure they are diff lengths, heights & lifting capacity. I’m just asking are they both compatible on the same tractor brackets ?

I’ve gotta set of 300hr Radial Take Off’s R1 15.5-R38 & 13.6-R24 Ag tires & wheels for a 5&6k JD tractor if anyone is looking $3,950 Mike in North Georgia six78 98six 322six

My JD 5115M drawbar hitch had excessive movement / slop left & right affecting backing trailer, pull type BatWing Bush Hog & my poultry caking machine. I had my machine shop friend drill my drawbar so that I could add a 5/8x4.5” bolt thru the factory hole in the upper & lower mount that...

Anybody know a part # OR a link to a parts breakdown on a 5115M 540M Loader with 3rd function ? The tractor has Joystick, mid 3rd function & loader mounting frames but no hydraulics up to frames for loader to hook too. I put all this on a another tractor one time buying 2 kit #’s from a...

Engine has blew excessive white smoke out exhaust 4 different times 5-10 seconds while mowing crossways on a hillside / bank with left side of deck downhill. ZD1511 has around 170hrs on it. I bought it new. I can’t duplicate this concern. it wasn’t in regen when this happened & runs...

JD 5115M PTO RPM Gauge Works Intermittently. Is this the black sensor on the right side of PTO output shaft ? Will I loose HyGard Fluid by removing this sensor ?

How in the heck do I get my subscriptions to show up on this dang new format ???

I have JD 500 pin quik tach forks & needing Global fork frame only .... to use my current forks with. Anybody know if the Global Frame only is available ?

I bought a used 2018 5115M OS with 261hrs on it. The book says change the Hydraulic Filter & Fluid at 100hrs & I’m sure PO didn’t do it. The fluid is clear as new as my two other JD were when I changed them. I only want to change the $97 filter inside the canister & top the HyGard Fluid...

I see the vertical parts piece by piece would be well over a grand $$ IF the brackets & stack would bolt to the existing muffler / filter burner deal. I’m hopefully selling my 5085E & rescuing a gently used 5115M with side exhaust. Do you guys know about this ?? I know it’d be cheaper to find...

I’m selling my 5085E 563 loader to make room for a gently used 5115M 540M loader :cool2: The 540M has a skid steer carrier that I’ll have to swap it out for a Global Carrier. Best I can tell I’ll need a BW16010 :confused: Will a Global Carrier off a H260 loader fit the 540M ?? I use to...

I saw this LVB25153 creeper gear kit listed & was wondering if any of you guy knew about or had info on it ? Is it a easily bolted on option ? How does engagement take place etc ? I have a call into this dealer ...... it says it fits JD 5425 which is a 4cyl with Power Reverser 12spd trans...

My 5093E 5101E both takes the RE253518 Air Filter which looks IDENTICAL to the SU20768 in my Newer 5085E. WHAT is the Difference ? Different filtering qualities :confused: Napa 9275 replaces BOTH of these filters.

Just like title says ?? I know the 24F/12R is an option but it still doesn’t slow the tractor down in A range 1st gear like the creep option. Even the 16spd in a M series still isn’t any slower in A1 than a 12spd E in A1 gear.

Tractor will take gear w/o using Clutch after it’s first cranked but after a few mins of use, you have to clutch every time or you get the dreaded alarm & neutral light flashing :thumbdown: I’ve bypassed the seat switch : didn’t help My 5093E & 5101E both take gear every time with no...

While removing the two rear skids from under deck to help wind rowing in heavy grass : I discovered the REAR baffles at backs of blades is why I get 3 windows. They direct the clippings to one side as their sprayed out :thumbdown: I removed deck, supported it by chains from my Front End...

Found a leftover 2018 ZD1511 72 SD at a good price. 0% & 60 was a no brainer. I mowed the front yard tonight before the bottom fell out raining. Hope the Regen Mess works out ok as I mow 8+ hrs a week I’m trying to load pix ......

I can’t figure out how to get engine to rev past the 1700rpm while in EPTO. I know it has electric throttle as compared to my 5093E & 5101E cable operated. I simply unhooked the cable above Left Rear axle to the injector pump on them to let engine rev WOT. I unhooked the black sensor on...

I just bought a BH 2815 Cutter because of the quality AND High BTS. It cuts great : no complaints. I was wondering if anybody has experience with the grass & cornstalk baffle Kit # 50069451 ? It’s supposed to help windrowing in heavy grass Borrowed pic :

I have a set of almost new 44x18-20 Rears & 10.00-15 Fronts. All 4 are Fluid Filled with 75% water & 25% AntiFreeze. Text only : six78 98six 322six in North Georgia

Is a Global Connection available for the 542 SL Loader ? My buddy just bought a gently used 5325 542 SL with the 500 Quik Tach Pin Connection & wants Global like his 5085M H260 has. I can't find any info on the JD sites .... Any help or links ?

Are these Available ? I'm going to fluid fill my rears & wanting weights too for my 72" Rear Discharge Mower. I've been mowing with a 66hp JD tractor for many years around my Farm & HATE tire spin and / or lack of traction. I don't live in a Subdivision with a groomed yard lol

I'm sure most all 5k series takes the same weights. I can't find any info if there is two different weights or only one. I've been told you can run one inside the wheel & two weights outside with bolts sandwiching all three together :confused: I'm not interested in a Rear Balast box & I...

I put my H260 Loader on my other tractor that had a 563 Loader on it & it works great. The H260 is a Good bit stronger but also heavier than the 563. My research shows 553 562 563 673 H240 H260 H310 H340 & H480 Loaders all fitting the same tractor brackets. True Not all Tractors will be...

My 4700, 4720 & 5093E needed another stablemate lol I wanted to find a 100hp 5k series Pre Tier3/4 low hour (440) nice unit before they all got gone. Us Chicken Farmers can't use cab units. I've found a donor tractor with R4 to trade these 18.4-30 tires. Now gotta find me a 96" Global bucket

Fluid leak where driveshaft goes into back of differential. Has anyone had this OR replaced the Seal there ?

I just unloaded my new ZD1211RL-72R rear discharge mower tonight& it's pourin Hyd Fld Mowed 30 mins & it's leaking 1/8" solid stream of Hyd fld from under Hyd Filter. Filter was so loose I turned it with 3 fingers. I tightened it & it's still pouring. I'll call dealer in am & remove filter...

I'm considering a ZD1511 72" since I can't find a real low hour ZD331. How do you rear discharge guys like the clippings blowing up under rear of mower ? How much blade overlap does the 72" rear discharge have ? Or how long is blades ? Does the side discharge have same overlap ? I'm...

I have a 4720 open station E-Hydro 400hrs running way too warm & has warning lights on at times. No leaks. Full of coolant. Has ran too warm since I bought with 130hrs. I only use it for Mowing with 110" RFM. Loader stays off. Radiator, Intercooler & air filter are all clean. Muffler...

This happens worse when engine is warm. Trans will NOT Pull. After several attempts it will take gear but then flash lights & quit pulling while moving. Happens in Forward or Reverse with or w/o elc PTO engaged. I've been told its the PR switch or low Hyd fluid pressure from a plugged...

It's like the Elc Fuel Lockoff Solenoid looses power when using PR Lever or engaging elc PTO. You can quickly shift PR lever back to neutral & eng will continue to Run, or disengage PTO immediately after engaging & eng will continue to run. Short to ground possibly ? Fuses ok best I can tell...

I hate the Threaded Adjustment stabilizers & wanna convert to square telescoping type like on a 5425 that you simply drop a pin in correct hole. You guys have a link to a parts illustration ?

I just bought a New JD MX10 cutter to replace my MX6 :dance1: I'm sold on the sloped DUAL layered top deck, blade speed & rear tail wheel design. I don't like the front chain setup though (borrowed pic) I'm in the process of cutting & fabbing front chain bracket to have chains Strait...

The dealer says Part # R262449. (Borrowed Internet pix) It's hollowed out & weighs 117lbs My buddy's 5425 has # R183722 which looks the same Bolt pattern. It's Solid & weighs 187lbs. My question is, will the older heavier solid R183722 fit my 5093E before I order it ?? I'm also...

The short tie rod end is extremely loose at right wheel. Nut is tight. Left side has no loose motion. It's hard to believe its worn out already. My 4700 has 1,690 hrs & still tight.

4720 has 360hrs. The 3pt lift lever use to have resistance like my 4700 & 5093. It raises & lowers my mower fine. Once raised, it now will slowly ease down because the lever eventually moves towards the down position. There's no springs & nothing appears loose where linkage goes inside. You can...

I had tubes installed in my Turf Tires on my JD 4720 to fill with fluid. The tire store used cheap generic knock off brand tubes that was thin as bicycle tubes. No Joke. I've had 3 rear tubes & 1 front tubes to split wide open. 12+ inches. I'm changing back to tubeless as my other two JD's...

Does anybody make one of these ? I've seen ripping buckets for Skid Steers. I'm wanting to dig a drainage ditch between my Two barns. My 6,7 & 8ft buckets are too Wide :-(

290 hour 4720 hydro. I was mowing today & it died. Temp hand was a lil hi but rad is clean & AF level full I pressed dash buttons & seen err 04 79 81 82 & 86 but 81 was showing when eng died. Any ideas ? As manual is useless.

Pay a little more the first time & be Done with the job. I put fluid in all 4 of my tires for traction on hills & a 1400lb 110" Rear Finishing Mower. I've got my rear 44x18-20 Turf Tire back at the tire store for the THIRD TIME. Cheesy THIN imported tubes splits wide open FIRST DAY of use &...

If I turn wheel slowly, it's ok. But turning quickly - it has hard spots in it. Can the pump have air in system OR can the pressure or volume be increased ? I'm running throttle at 2,000 rpm's, because I'm Mowing in E-PTO setting. Specs shows this 4720 P/S to have more flow than my older...

My 5425 in epto setting - the eng will rev full 2600 rpm's. I wanted this 4720 I jus bought, to rev a little over 1750 to speed up my rear finishing mower blades for a smoother cut. I unplugged the rearward PTO sensor plug & plugged it into the forward sensor. It now revs full rpm &...

I know the open station epto lever is on right side behind the seat, right beside the mid pto engagement lever if equipped. I'm looking at a cab unit that has the epto on tach at 1750rpms. But I can't find a lever. There's NO levers behind the seat. The owners manual shows a "PTO" lever on...

New to forum, please forgive me. This noise happens worse when no attachment is hooked up & I crank tractor. Noise is still present engaging & disengaging the PTO. Seems to click when pto shaft us jus free-wheeling (turning) Noise doesn't seem to happen with attachment hooked to PTO, but...

I wanted the WIDEST Single deck RFM I could buy for my Farm. I was concerned about it turning slower blade spd than my Bush Hog 84" at 18,266 rpm. The Befco 14,998 BTS didn't cut as smooth as I was use to :-( ..... So I ordered the 30mm Larger Gearbox Pulley for the smaller 90" mower, and...