Search results

Woods 9180RD-2 Bought the woods carrier bearing and front section of the plastic guard. The bearing was froze solid and hasn't turned in some time. Pressed it out after removing the snap ring and installed, pressed in new. The jackshaft has been wearing on the bearing a long time and needs to...

Loaned the tractor out to bring hay in. Was pulling a wagon and the front tiers just stopped and rear started to spin on pavement. It was not in 4WD only 2WD. Fella tried shifting in/out of gears and ranges but it was stuck. Let it sit with motor off in neutral for about a 1/2 hour. Started it...

Looking for opinions on 12V fuel transfer pump. Have looked thru reviews on line and who knows for accuracy. Fill-rite always shows up but they are also the most expensive. The extreme Power US gives me a hint that its made overseas like HF and just a name. Not against if its overseas, just...

Have a woods 3180 batwing that needs a center drive shaft bearing. Its a 1.5 inch ID greasable bearing, and part number 13133. The issue just like boat bearings, if you can look into the specs instead of paying $65 you can get it for $20. The bearing is where the tractor drive shaft connects...

JD John Deere 5425 MFWD (4WD) tractor. This is a 2005 81HP with good tires all around. Has 2 remotes, 540 and 540E PTO, 9 speed FWD and 3 REV Sync Shuttle transmission. Open cab ROPS with canopy. Seat cushions were worn with some damage, shift knob was broken, and exhaust pipe was bent so...

Couple questions: Stopped by TSC and Rural King today looking for some quick pins to put in the adjustable lower arms on the 3 pt. All that it in there now is a couple 5/16 bolts just dropped in place. Thought I could find some hitch pins or such to use instead. This way I can adjust the...

Tried in the Massey section but no good, maybe general area may have better luck Bought a Massey Ferguson MF 18 box blade. It has ripers which come down somehow, and maybe its just has some rust and that's why its not coming down. Anyone ever work with one of these? The unlock bar moves easy...

Picked up a MF 18 box with all its teeth and figure the pivot pins are a bit rusty, but need to figure out what needs to be done to low and arise the teeth. Resembles this one AuctionTime.com | MASSEY-FERGUSON MF18 Online Auctions

Want a box blade that can handle 100 hp or more, and at least 7 feet wide. Been looking around and there are a lot of BB out there but most are not for large tractors. Have a bunch of areas I need to smooth out Look at the LP HR3584 and got a price from Glassgow Kubota and it was $4500. Could...

Have a 5425 and looking for a loader. Is there anything that can indicate which loaders (JD, Quickie, other, used) will fit on the tractor? For that matter anything that can folk can use to determine which loaders fit which tractor frames?

Bought a 5425 and 15 foot RD9180 finish mower from a KY horse farm. Was a good deal on both as a set and going to sell the 5425 later. The shift knob was broken so looked up the parts to replace and all the items came up to almost $50 for a plastic knob. Dang JD sure has high prices...

Have a new to me 5425. Its a 2005 model and has spent its entire life pulling around a 15 foot batwing finish mower at a horse farm. The 3 PT is in full up position and I have been unable to get it to go down so far. Have adjusted the drop valve, and have the lift handle full down. Jumping...

What is better, single or double row cultipacker? My tractor is 7ft wide, and assume need at least that wide and maybe more. Finding many on craigslist, but as with all used stuff there can be issues. Any wisdom when looking at used stuff?

Cutting several acres with a F3990 and many places it just way to bumpy. Think I should bring my track loader over and rip the ground up, then smooth and reseed. I need to bring the track loader over anyway because of some real bad areas. Have also been thinking about using a disc harrow to...

Anyone have access to the dealer data base which can advise what has been done to a tractor? Looking for info on prior repairs. No names needed nor who did the repair, just what repairs were done over the years.

Have had my Hustler Fastrack for over 20 years. Last year I put new deck bearings in and replaced belts. It didn't need the belts Was cutting and the left wheel just stopped pulling. Find that a 5/16 rod snapped behind the jam nut. The part cost $32 for a 5/16 rod threaded with left and...

Looking for a sprayer and would like thoughts of type to get. Have about 12 acres of flat to moderate rolling, and about 7 acres of a bit steeper angle. Plan is to use it for weed control mostly so 24D and maybe some crossbow along the woods, or such type. Figuring maybe 300 gallons and...

Anyone install a HTL on the M9540? If so what size did you install? Have a 1 inch pin Cat 2 Reposting because some how I first posted this in the New holland section Looks like Fit Rite has a 20 week lead time

Anyone install a HTL on the M9540? If so what size did you install?

M9540 with skid steer attach Looking at several and like the clam shell style. Many list as root rake but I'm not going to try and bend the FEL arms trying to do something like that. Skid Steer Attachment Depot has a 72 inch which looks like what I'm thinking about. just as a pic only of style...

Anyone know what the gear ratio is for the M9540DHC24 SN 86399 ? The tire sizing is not matching up so trying to verify other possible issues. Have read the M7040 has a 1.438 ratio, but if I use that with my tires this would mean real trouble. Rear 18.4-30 Front 12.4-24

Anyone have a tractor that has electrically engage the PTO and 4x4? Just bought the tractor and giving it a closer once over. When I step on the break the 4x4 lights up on the dash. Now this is with the tractor stopped and in neutral. I need to drive it around some and see if other things...

Have a new to me tractor, its a Kubota M9540HDC24. Been going thru what it needs and have not used it much. Has electric PTO and 4x4 engagement. When the break pedal is depressed (stopped and in neutral) the 4X4 symbol on the dash lights up, don't know if that means anything The right front...

Been looking over some M9540's the last few days and came across something that brings up a question. All these are cab tractors and when I moved the POT lever to engage it lit up, but I started hearing beep, beep, beep .... Moved it back to disengage, then slowly moved it to engage and heard...

Thinking about raising cow(s) for own consumption. Questions around when to get them (I'm thinking caves), how to care for them and when is the best time for slaughter. I have never raised cows and have heard many things but would like input Have 20 sum acres and wonder what is the best cow...

Found a open rops M7040 for I think a good price. Its 2012 w 1200 hours, 2 remotes, R4 tires and Quickie 51 loader. Does show where it has leaked a bit with the loader connections. Think its a 8 speed, and wonder if there where any issues with with this model tractor that should be looked for?

Have to many trailers and need more then my car trailer. Going to buy a tractor (60 to 80 hp) which will be in the 6K to 8K load range. May get some other attachments, but for right now, just trying to figure issues with two different type trailers. Plan to use a 2 5/16 or pintle but like 2...

Any way to have Only New post show only "New" ones. Appears New or Today shows the same list. Would be nice to see folks posting the newest topics instead of all new post for the day

Was going to buy new with cab and at least 60HP, but the cab part came from the wife. Been using a friends open ROPS for the last few years. Have more land now and don't like the idea of using someone else stuff, so I put off things. In any case found a couple on CL which caught my eye, so...

Have about 37 hours on my F3990 and the last couple of times mowing, noticed the motor rpms going down a bit. The first time the grass was higher then normal so thought maybe that was it, but next time it was just tick as usual. Looked at the fuel filter and while its not easy to see, it...

Was looking at buying a tractor (Kubota M45 or 47) and 8 foot finish mower, but then was told about the F series 72 inch mower. Found a 2017 model with only 25 hours at a dealer. Found others with not much more hours. Trying to figure out if these are great 4x4 mowers then why so many used...

Instead of buying one, I'm looking into building a herbicide sprayer. Have a 250 gallon square tank on a pallet. So need a pump, tubing, bypass valve, wand, tubing and other stuff. Want to put the tank on the Kubota RTV and then have tubing to make a boom to spread out maybe 20 to 30 feet...